Swap out a mesh

Eman Eal · September 19, 2022, 18:53

Howdy,

I am running batch simulations. I have several fluent .msh files. I would like to be able to swap the mesh in my CFX simulation out for test as if I had manually changed the geometry in workbench and then updated the simulation.

Currently I have been able to import the mesh but it simply treats it as a second object.

Does anyone know how to do this, idealy via macros.

Thanks a lot.

ghorrocks · September 19, 2022, 20:31

Record a session file in CFX-Pre where you do all the actions you want, including deleting the second mesh object and sorting all that out. Then look at the session file and you can see the syntax for replacing a mesh.

September 19, 2022, 18:53	Swap out a mesh	#1
Eman Eal New Member Join Date: Aug 2022 Posts: 6 Rep Power: 4	Howdy, I am running batch simulations. I have several fluent .msh files. I would like to be able to swap the mesh in my CFX simulation out for test as if I had manually changed the geometry in workbench and then updated the simulation. Currently I have been able to import the mesh but it simply treats it as a second object. Does anyone know how to do this, idealy via macros. Thanks a lot.

September 19, 2022, 20:31		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	Record a session file in CFX-Pre where you do all the actions you want, including deleting the second mesh object and sorting all that out. Then look at the session file and you can see the syntax for replacing a mesh. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 08:38
[snappyHexMesh] High quality mesh for wind in complex urban environment	ziboaa	OpenFOAM Meshing & Mesh Conversion	1	January 12, 2021 16:33
[ICEM] Bad Quality Hybrid Mesh External Flow	tim13	ANSYS Meshing & Geometry	0	March 8, 2020 03:22
Star CCM Overset Mesh Error (Rotating Turbine)	thezack	Siemens	7	October 12, 2016 12:14
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11