CFX on Linux

July 12, 2007, 12:11

Could you help me please?

What I have to do, if I want to run CFX-Pre or CFX-Post on Suse Linux 10.2?

I appreciate much for your help!

July 13, 2007, 09:31

Buy a license and just install it.

July 15, 2007, 00:43

LOL!!!

July 16, 2007, 16:20

well sometimes it can not work with not a license from ansys............

they say that you must pay for that..... and i believe so

best regards

July 16, 2007, 21:17

No seriously, Ioakimidis probably has problems with the graphics. You need to read the manual on what libraries you should have on your system or what options to set for CFX to get CFX-post and pre running. I normally run my simulations on a linux cluster but pre and post is done on a windows desktop.

July 17, 2007, 08:24

we also working on linux.... but the pre and post on windows...... if you have only one workstation make 2 disk parts put win on one and linux on the other... make pre with win and run under linux,,,,,

best regards

July 17, 2007, 10:05

I have Linux 10.2 and ANSYS v10 doesn't work! The pre,post and Solver working properly if you have ANSYS 11. I has nothing to do with Licence!!!I have all licences. I have already solved my problem!Thank you for your help!

August 3, 2007, 13:05

This works for 32bit machines for cfx pre and post. I have not,however, been able to get workbench to work yet...

open .bashrc file and add:

export LD_PRELOAD=/lib/libgcc_s.so.1

July 12, 2007, 12:11	CFX on Linux	#1
Ioakimidis Konstantinos Guest Posts: n/a	Could you help me please? What I have to do, if I want to run CFX-Pre or CFX-Post on Suse Linux 10.2? I appreciate much for your help!

July 13, 2007, 09:31	Re: CFX on Linux	#2
KB Guest Posts: n/a	Buy a license and just install it.

July 15, 2007, 00:43	Re: CFX on Linux	#3
Bart Guest Posts: n/a	LOL!!!

July 16, 2007, 16:20	Re: CFX on Linux	#4
hayate Guest Posts: n/a	well sometimes it can not work with not a license from ansys............ they say that you must pay for that..... and i believe so best regards

July 16, 2007, 21:17	Re: CFX on Linux	#5
Bart Guest Posts: n/a	No seriously, Ioakimidis probably has problems with the graphics. You need to read the manual on what libraries you should have on your system or what options to set for CFX to get CFX-post and pre running. I normally run my simulations on a linux cluster but pre and post is done on a windows desktop.

July 17, 2007, 08:24	Re: CFX on Linux	#6
hayate Guest Posts: n/a	we also working on linux.... but the pre and post on windows...... if you have only one workstation make 2 disk parts put win on one and linux on the other... make pre with win and run under linux,,,,, best regards

July 17, 2007, 10:05	Re: CFX on Linux	#7
Ioakimidis Konstantinos Guest Posts: n/a	I have Linux 10.2 and ANSYS v10 doesn't work! The pre,post and Solver working properly if you have ANSYS 11. I has nothing to do with Licence!!!I have all licences. I have already solved my problem!Thank you for your help!

August 3, 2007, 13:05	Re: CFX on Linux	#8
Mr. Solution Guy Guest Posts: n/a	This works for 32bit machines for cfx pre and post. I have not,however, been able to get workbench to work yet... open .bashrc file and add: export LD_PRELOAD=/lib/libgcc_s.so.1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compressible Flow in Ansys CFX	bcheruk	CFX	15	July 6, 2017 07:30
HELP!!: PARALLEL CFX ERROR IN LINUX	JP	CFX	8	April 24, 2008 05:03
What Linux distribuitions support CFX?	Bayard Morales	CFX	2	September 28, 2007 14:19
CFX on Linux	Ogbeni	CFX	14	December 3, 2003 09:25
CFX 4.4 installation problem	Pandu Sattvika	CFX	1	December 1, 2001 05:07