|
[Sponsors] |
May 7, 2007, 07:17 |
-DESIGN PROBLEM-CFD solution
|
#1 |
Guest
Posts: n/a
|
how CFD useful in solving double pipe heat exchanger design problem ,how i commented over use of CFD CFX code to solve design problem through CFD analysis.
|
|
May 7, 2007, 18:32 |
Re: -DESIGN PROBLEM-CFD solution
|
#2 |
Guest
Posts: n/a
|
Hi,
CFD can be a very useful tool in heat exchanger design. Many heat exchanger manufacturers use it. Glenn Horrocks |
|
May 9, 2007, 04:56 |
Re: -DESIGN PROBLEM-CFD solution
|
#3 |
Guest
Posts: n/a
|
how i manupulate my design consideration whith CFD analysis , for example if i an analying temp so how the temp plot affect the design of heat exchanger because we saw only the temp increase or decrease or the heat exchange between to fluid.
|
|
May 9, 2007, 04:56 |
Re: -DESIGN PROBLEM-CFD solution
|
#4 |
Guest
Posts: n/a
|
how i commented over use of CFD CFX code to solve design problem through CFD analysis.
|
|
May 24, 2007, 06:50 |
Re: -DESIGN PROBLEM-CFD solution
|
#5 |
Guest
Posts: n/a
|
Using CFD one can analyse the areas of hot spots,srtesses due to temp,flow through bundle & shell,HT rates,Fluxes,so one can decide on baffle spacing,no of passes etc. To use any code first go through sme basics of CFD,and the codes.A simulation for a heat exchanger could need large computational power as well as time.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD Design...The CFD Future | John C. Chien | Main CFD Forum | 20 | November 19, 2015 23:40 |
Where do we go from here? CFD in 2001 | John C. Chien | Main CFD Forum | 36 | January 24, 2001 21:10 |
Errors in CFD | Lily Kabanj | FLUENT | 8 | May 1, 2000 07:52 |
knowledge about CFD. | VASANT NAVATI | CFX | 1 | November 28, 1999 00:22 |
goal of CFD | MYM,Rameez | Main CFD Forum | 7 | August 16, 1999 00:12 |