|
[Sponsors] |
March 5, 2007, 12:28 |
Hexahedral mesh with CFX-Mesh
|
#1 |
Guest
Posts: n/a
|
Hi, everybody
I need to mesh a geometry with hexahedral elements. Can I do it in CFX-Mesh? I only can do it with triangles and quads. |
|
March 5, 2007, 14:50 |
Re: Hexahedral mesh with CFX-Mesh
|
#2 |
Guest
Posts: n/a
|
In CFX-Mesh, you can technically create a structured mesh by extruding one face (i.e. surface mesh) out across the entire domain. This means for simple geometries such as a straight pipe, it can be done. For any more complicated geometries you will have trouble extruding the mesh properly and it will either fail or generate a poor mesh. See the documentation for info on extruding, or look into gridgen or another meshing package to generate more complex structured meshes.
|
|
March 5, 2007, 16:37 |
Re: Hexahedral mesh with CFX-Mesh
|
#3 |
Guest
Posts: n/a
|
Why look for gridgen if ANSYS ICEM CFD is superior? And better suited to CFX...
|
|
March 6, 2007, 06:24 |
Re: Hexahedral mesh.I don’t know if it is possib
|
#4 |
Guest
Posts: n/a
|
Thanks for your advice
As you have said, I have created a structured mesh by extruding one face (extruding 2D mesh with option nº of layers = 1) but the problem is that I have what I want in only one direction. If I try to use inflation and extruding together, I only have a hexahedral mesh near the walls, not in all the geometry. Why? Is there any option to apply inflation to all the geometry? Regards, Isabel |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 09:54 |
CFX Mesh Deformation problem | Silmaril | CFX | 7 | October 19, 2010 11:00 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 15:09 |
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks ! | Vu Trinh Tuan | CFX | 11 | March 28, 2005 20:04 |
importing mesh from ICEM CFD into CFX 5 | Jay | CFX | 2 | November 12, 2002 14:46 |