 |
 |
 |
|
|
|
[Sponsors] | ||||
December 10, 2006, 15:29
|
water properties in supercritical region
|
#1 |
|
Guest
Posts: n/a
|
hi....plz help me how to input supercritical prop of water into CFX.
|
|
|
||
|
December 14, 2006, 01:07
|
Re: water properties in supercritical region
|
#2 |
|
Guest
Posts: n/a
|
CFX 10.0. Make an RGP file or use the Redlich Kwong Equation of State
CFX 11.0. Same as CFX 10.0 or use the IAPWS equation of state. |
|
|
|
||
|
April 14, 2009, 15:45
|
iapws - if97
|
#3 |
|
New Member
Marcin
Join Date: Apr 2009
Posts: 2
Rep Power: 0  |
Hi all!
I have a guestion about iapws-if97 in Ansys Cfx. In my library materials, iapws steam have diferent scope (range) than in The International Association for the Properties of Water and Steam releases. For egzample: Steam 1 in my CFX have 273.15<T<450 K and 620<p<100 kPa while in IAPWS releases Steam 1 have: 273.15<T<623.15 K and ps(T)<p<100MPa. If You know why, please answer. Thanks for attention. Marcin |
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 06:21 |
| [Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 05:04 |
| [Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |
| [Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 09:19 |
| uptodate water distribution network | fredius,magige,tanzanian,(e.a) | Main CFD Forum | 0 | January 27, 2002 08:10 |
Linear Mode
