|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Ilya
Join Date: Oct 2019
Posts: 16
Rep Power: 6 ![]() |
Created CFX project in workbench.
Imported geometry (pipe with two outlets). Constructed a structured grid. Opening CFX. I get an error (see photo). Photo: ![]() ![]() ![]() ![]() ![]() ![]() Tried creating a simple mesh, the mesh was successfully imported into CFX. CFX opened. Why won't CFX open with a well-drawn grid? PC with 64 GB RAM. There is enough memory. Rebooted the PC. The error remains. I built the grid for a long time and diligently, removing it means losing wasted time. HELP |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
M
Join Date: Dec 2017
Posts: 692
Rep Power: 12 ![]() |
Try importing it after opening CFX in standalone version (not from within the work bench). If the error persists or another one occurs, a closer look is needed.
|
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to estimate the quality (mesh expansion factor) of the mesh at interface CFX? | gera | CFX | 3 | February 12, 2020 06:18 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
CFX Mesh Deformation problem | Silmaril | CFX | 7 | October 19, 2010 10:00 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |