|
[Sponsors] |
July 15, 2006, 03:45 |
how CFX output into tecplot to analyse?
|
#1 |
Guest
Posts: n/a
|
how CFX output into tecplot to analyse?
and which type of file can output~? thanks a lot!!! |
|
July 18, 2006, 17:29 |
Re: how CFX output into tecplot to analyse?
|
#2 |
Guest
Posts: n/a
|
cfx-solver--->tool--->expot--->cgns in tecplot, import--->cgns, done.
|
|
July 19, 2006, 00:01 |
Re: how CFX output into tecplot to analyse?
|
#3 |
Guest
Posts: n/a
|
thanks for your reply~
i output cgns in CFX10.0,and i used tecplot9.0 for importing it, but a error come out: file error:file not found or invalid CGNS format. is that cfx10 and tecplot9 the problem,or sthelse??? thanks a lot~~~ |
|
July 19, 2006, 18:24 |
Re: how CFX output into tecplot to analyse?
|
#4 |
Guest
Posts: n/a
|
tecplot 9 always has trouble to import CFX's cgns file. You can use Tecplot 10. BTW: I also have found Tecplot 10 sometimes has some trouble to import CFX10's cgns, but CFX 5.7 always produces good cgns files for tecplot 10. So if your tecplot 10 still can't import CFX10's cgns. try to use CFX5.7 solver to convert CFX10 result file to cgns. It will work for sure.
The last way to use tecplot analyzing CFX result is writing a code by yourself to process the CFX data file. In CFX-post, you export domain ASCII data and node connectivity information to files. If you are familiar with tecplot format, you can write a code to transfer data to tecplot format. I used to write one, but it made me headache. good luck |
|
July 19, 2006, 18:29 |
Re: how CFX output into tecplot to analyse?
|
#5 |
Guest
Posts: n/a
|
forget one thing. Couple of earlier versions of Tecplot 10 also have some trouble to import cfx cgns file. Make sure you have sort of new tecplot 10 version, or you can use tecplot 360. Tecplot 360 has CFD analyzer included. Send email to tecplot company. They will give you a one month free trial of tecplot 360. It is a wonderful product.
|
|
July 19, 2006, 21:32 |
Re: how CFX output into tecplot to analyse?
|
#6 |
Guest
Posts: n/a
|
thanks a lot for your applying~
i install a type of TEMPLOT10 and it's done~! best wishes for you |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFX to tecplot for plotting Cp(preesure coeff.) | jason_ | CFX | 3 | June 20, 2011 19:38 |
Tecplot for CFX post processing | pantangi goud | CFX | 2 | August 24, 2005 17:42 |
CFX post to Tecplot | nandu | CFX | 2 | December 4, 2002 09:27 |
Tecplot & CFX 4.4 | S. H. Kim | CFX | 3 | December 20, 2001 07:07 |
CFX 4.4 installation problem | Pandu Sattvika | CFX | 1 | December 1, 2001 05:07 |