|
[Sponsors] |
March 28, 2006, 21:58 |
Problems on running cfx in parallel
|
#1 |
Guest
Posts: n/a
|
I try to run cfx5.7 in a supercomputing center. The hardware is IBM Power 4, the system is aix 5.2. They don't support pvm. So I use loadleveler to submit my command:
cfx5solve -def xxxx.def -s 1.2 -start-method "MPICH Local Parallel" -part 10 After the cfx finished the partitioning, it stopped. An error has occurred in cfx5solve: | | | | The CFX-5 solver exited with return code 1. No results file has | | been created. Can anyone tell me what is wrong here? Thanks in advance. |
|
March 29, 2006, 05:10 |
Re: Problems on running cfx in parallel
|
#2 |
Guest
Posts: n/a
|
The command should be okay if your machine support MPICH...
1. check if you have 10 unused par_proc license. 2. check if you have other MPI driver that work for your IBM machine. Maybe talk to your system adminstrator first. I remember that I have some problem using PVM in my SGI machine and admin has installed a SGI MPI driver to solve this problem. 3. try a serial run with the same def file and see if that solve okay. Good luck |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Running mapFields with Parallel Source and Parallel Target | RDanks | OpenFOAM Pre-Processing | 4 | August 2, 2016 06:24 |
Core usage on CFX parallel processing | alterego | CFX | 6 | December 21, 2011 06:45 |
Running dieselFoam in parallel. | Palminchi | OpenFOAM | 0 | February 17, 2010 05:00 |
Ansys CFX 11 SP1 runs on Vista with problems | kayp | CFX | 3 | February 5, 2008 17:49 |
Problems in Parallel PHOENICS | Zeng | Phoenics | 3 | February 27, 2001 14:28 |