high rotational speed centrifugal pump

vivjk94 · April 25, 2022, 07:48

Quote:

Originally Posted by ghorrocks

What do you mean 2.5D? I use 2.5D to mean where the flow domain is 2 dimensional, but you are modelling 3 velocity directions - so you are including out of plane velocities. This is usually done with a periodic boundary.

I cannot see how you can model a centrifugal pump in 2.5D, as I understand it.

Also - this is the CFX forum, for questions about Fluent try the fluent forum. But your question seems to be more about post processing anyway.

im sorry, i meant to say that i made a 2D centrifugal pump but extruded it in the z direction. i did this because the volute width and the impeller width were different.
sorry for the confusion

ghorrocks · April 25, 2022, 08:09

What Post Processor are you using?

vivjk94 · April 25, 2022, 10:25

Quote:

Originally Posted by ghorrocks

What Post Processor are you using?

i use fluent post for finding head and use cfx post for velocity and pressure

ghorrocks · April 25, 2022, 19:41

We cannot help you with the Fluent post processor, try the fluent forum for that.

But we can help you with the CFD-Post post processor work (despite this model being done in Fluent).

Please post an image of what you are modelling and show where you are having the problem and what you want to see.

April 25, 2022, 08:09		#42
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	What Post Processor are you using? __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

April 25, 2022, 19:41		#44
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	We cannot help you with the Fluent post processor, try the fluent forum for that. But we can help you with the CFD-Post post processor work (despite this model being done in Fluent). Please post an image of what you are modelling and show where you are having the problem and what you want to see. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX High speed wall function-ERROR	Fabiio87	CFX	5	April 29, 2021 13:53
Power calculation in centrifugal pump - CFD Post	Hazem_9	ANSYS	1	May 11, 2017 15:22
Strange high velocity in centrifugal pump simulation	huangxianbei	OpenFOAM Running, Solving & CFD	26	August 15, 2014 03:27
Autoblade centrifugal pump template	mahdi balali	Fidelity CFD	3	February 18, 2014 09:56
how to solve the diverage of high speed centrifugal compressor, CFD code is STAR CCM	layth	STAR-CCM+	3	May 21, 2012 06:48