|
[Sponsors] |
CFX new user, problem with solver and PRE settings |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 13, 2006, 16:46 |
CFX new user, problem with solver and PRE settings
|
#1 |
Guest
Posts: n/a
|
Hello friends, here i have some questions. 1. On what basis we have to select time step, i.e., auto time scale, physical time scale and local time scale factor ? 2. For which type of problems resolution scheme will be ok ? 3. On what basis we have to decide whether we have to go for medium 5% turbulence or we have to go for 10% or less than 1% ?
4. (a POST settings related qstn)How to create a plane in a quarter cut cylinder ? Many thanks. PLZ reply as early as possible |
|
March 13, 2006, 23:42 |
Re: CFX new user, problem with solver and PRE sett
|
#2 |
Guest
Posts: n/a
|
Your questions are too broad. Have a read thru the user manual first.
3.depends on your problem.... Sometimes turbulence condition doesn't affect the solution much. If you have experimental data, just use it! 4.a couples of ways to do that...look for icon above the view window. You have to know where to put this plane in the domain (ie. location of this plane) |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ANSYS Workbench on "Uncertified" Linux Distros | hsr | CFX | 289 | April 20, 2023 10:23 |
Ansys 13 CFX problem on LInux Opensuse 11.4 | serendipity | CFX | 10 | August 7, 2012 04:24 |
[ICEM] trouble with mesh quality from ICEM in CFX Solver | escher25 | ANSYS Meshing & Geometry | 0 | February 28, 2011 08:38 |
CFX 5.7.1 PRE and solver won't start | daniel | CFX | 1 | January 20, 2006 11:09 |
problem in CFX solver about isolated volumes | Yuan | CFX | 2 | August 16, 2004 23:54 |