How to create and define multiple domain?

January 25, 2005, 04:07

Dear Experts,

I want to simulate a double pipe heat exchanger. How do I create the geometry, i.e., the outer wall (finite thickness), annular fluid, inner wall (finite thickness) and inner fluid? Just give me a outline.

Regards,

Mishar

January 25, 2005, 08:10

What package you are using? CFX-Build,Workbench with CFX-Mesh or ICEM? (For me ICEM is more suitable, but with some CAD package).

January 25, 2005, 08:40

Hi deLuther,

Our organization has not renewed the license yet but it is under negotiation. Currently we have obtained license for Fluent/Gambit. So please tell me how to do it using CFX-Build.

Thanks for your time and attention.

Regards,

-Mishar

February 2, 2005, 20:51

try to do the following: 1. greate a tube having the inner tube diameter, then make b-rep, 3d , 2d, meshing and write file.

2. Repeate step 1 with a tube have the inner diameter of annular flow (outer dia of the inner tube), with a different name

3. Repeate step 1 with a tube have the outer diameter of annular flow, with a different name

4. Go to CFX pre and import the two files in one. Therefore, you will got three domain. The 1st one for the inner tube (fluid type), 2 nd for the inner tube thickness (solid type) and the 3 rd for the annular flow (fluid type)

5. go on

I wish this could help

February 3, 2005, 08:31

Many thanks Mr. Neser. I will try it. Regards.

January 25, 2005, 04:07	How to create and define multiple domain?	#1
mishar Guest Posts: n/a	Dear Experts, I want to simulate a double pipe heat exchanger. How do I create the geometry, i.e., the outer wall (finite thickness), annular fluid, inner wall (finite thickness) and inner fluid? Just give me a outline. Regards, Mishar

January 25, 2005, 08:10	Re: How to create and define multiple domain?	#2
deLuther Guest Posts: n/a	What package you are using? CFX-Build,Workbench with CFX-Mesh or ICEM? (For me ICEM is more suitable, but with some CAD package).

January 25, 2005, 08:40	CFX-Build	#3
mishar Guest Posts: n/a	Hi deLuther, Our organization has not renewed the license yet but it is under negotiation. Currently we have obtained license for Fluent/Gambit. So please tell me how to do it using CFX-Build. Thanks for your time and attention. Regards, -Mishar

February 2, 2005, 20:51	Re: CFX-Build	#4
Neser Guest Posts: n/a	try to do the following: 1. greate a tube having the inner tube diameter, then make b-rep, 3d , 2d, meshing and write file. 2. Repeate step 1 with a tube have the inner diameter of annular flow (outer dia of the inner tube), with a different name 3. Repeate step 1 with a tube have the outer diameter of annular flow, with a different name 4. Go to CFX pre and import the two files in one. Therefore, you will got three domain. The 1st one for the inner tube (fluid type), 2 nd for the inner tube thickness (solid type) and the 3 rd for the annular flow (fluid type) 5. go on I wish this could help

February 3, 2005, 08:31	Many thanks Mr. Neser	#5
mishar Guest Posts: n/a	Many thanks Mr. Neser. I will try it. Regards.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] How to create non-comformal mesh at the interface of two blocks?	bluelc	ANSYS Meshing & Geometry	3	September 26, 2013 23:59
One critical error while compiling lam711	billpeace	OpenFOAM Installation	0	October 30, 2006 05:41
How to create multiple solid-fluid domain?	Harendra	Siemens	6	January 28, 2005 14:58
IcemCFD 4CFX-How to fix domain	Ahmed	CFX	6	March 9, 2004 19:38
CFX 5.5	Roued	CFX	1	October 2, 2001 17:49