|
[Sponsors] |
November 3, 2004, 02:34 |
How to simulate stirred tanks
|
#1 |
Guest
Posts: n/a
|
Dear Respected Expert Users,
I want to simulate a stirred vessel using CFX-5.7. I have drawn a vessel (basically a circular cylinder) and a propeller type stirred using SolidWorks. Please tell me how to put the stirrer inside the vessel and import it to CFX-Pre to define two domains. Should also I need to define any event for sliding meshes like STAR-CD? I had some experiences using MixPert of STAR-CD. Please give some guide in this regard. Regards, |
|
November 3, 2004, 10:01 |
Re: How to simulate stirred tanks
|
#2 |
Guest
Posts: n/a
|
Work through the relevant CFX 5.7 tut that deals with stirred reactors.
|
|
November 3, 2004, 22:13 |
Re: How to simulate stirred tanks
|
#3 |
Guest
Posts: n/a
|
But the tutorial (Tutorial 15- Multiphase flow in a mixing vessel) reads two files (MixerTank.geo and MixerImpeller.def), one of which is a CFX-4 file and another is a definition file. I need to know how this type of simulation could be done using IGES imports, mesing and then import to CFX-Pre. What are the steps to be performed before importing to CFX-Pre?.
Please Help. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
k-epsilon model for stirred tanks | Parag Shah | Main CFD Forum | 3 | June 22, 2013 15:24 |
Problems scaling down the mesh of a stirred tank (GGI, icoDyMFoam) | Tobb | OpenFOAM | 2 | February 7, 2013 13:06 |
Multiphase modelling of stirred tanks | Harish Appa | FLUENT | 9 | June 10, 2007 10:11 |
Simulate trace in a stirred tank in CFX5.7.1 | airtaohui | CFX | 2 | March 2, 2006 07:53 |
simulation of stirred tanks | hu | Main CFD Forum | 0 | February 21, 2001 11:50 |