|
[Sponsors] |
January 3, 2004, 02:24 |
turbulance model
|
#1 |
Guest
Posts: n/a
|
hi cfd-friends,
i am doing my master's degree in Anna university-India,i have doubt in flow field, now i am doing in electrostatic precipitator(ESP) model study as well as ESP simulation study. In the ESP there are three perforatated plates(ie. GD screens )are placed in the inlet of the ESP ,collecting plates are present with electrodes.In the model study ,it gives reynolds No.more than 4000 above,so the flow is turbulance(inner ducts & inside flow).In the flow model study i got design value(velocity 0.64 m/s ) Meshing is come under Overlapping meshing. i am chaotic with turbulance model study because what type of turbulance modell i should choose? zero equation,K-e model ,free flow turbulance if you have any idea's about ESP turbulance model pls send your suggestions. yours friendly, subramanij. my mail ID. subramanij@hotmail.com subramanij@rediffmail.com |
|
January 4, 2004, 18:00 |
Re: turbulance model
|
#2 |
Guest
Posts: n/a
|
Hi Subramanji,
It is unlikely anybody here is going to be a specialist in electrostatic precipitators! This means it is unlikely anybody here will be able to answer your question directly. Can I suggest firstly a detailed literature review, then you try the various turbulence models and determine for your self the best one. You always learn more when you do the comparison yourself. Glenn |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
multiphaseInterFoam for RAS turbulence model | chiven | OpenFOAM Bugs | 8 | December 6, 2017 03:08 |
help for different between les model (subgrid-scale model) | liuyuxuan | FLUENT | 1 | October 2, 2009 16:25 |
Grid resolution for full-scale and down scaled model | gravis | Main CFD Forum | 0 | October 2, 2009 11:27 |
2 stage axial turbine model convergence issues | sherifkadry | CFX | 2 | September 7, 2009 21:51 |
multi fluid mixture model issue | rystokes | CFX | 3 | August 9, 2009 20:13 |