CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

CSO chamber using CFX

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 19, 2002, 11:03
Default CSO chamber using CFX
  #1
a.melandinos
Guest
 
Posts: n/a
I am trying to model a Combined Sewer Overflow using CFX. Because I started to use CFX one month ago and I don't have enough time, I need help and where I am there is no one particularly specialist to help me sufficiently with that software. I would appreciate if some one send me a file containing information on how to model a CSO chamber using CFX.

Kind regards Athanasios
  Reply With Quote

Old   February 19, 2002, 16:46
Default Re: CSO chamber using CFX
  #2
P.Fonteijn
Guest
 
Posts: n/a
What is a CSO? Which physical models do you need? Is it multiphase flow. Are particles involved. Do you have to show that the thing works fine or do you have to redesign it.

In other words, what do you want to do, what is the purpose of the modelling?

Pascale
  Reply With Quote

Old   February 20, 2002, 08:31
Default Re: CSO chamber using CFX
  #3
Herve
Guest
 
Posts: n/a
Athanasios,

CFX staff have done CSO simulations and presented these at conferences. You should ask them for some advice on that and whether they could supply a "template" example..
  Reply With Quote

Old   February 25, 2002, 04:24
Default Re: CSO chamber using CFX
  #4
athanasios melandinos
Guest
 
Posts: n/a
CSO means Combined sewer overflow and it has been used to reduce up stream flooding during storm events. These CSOs are placed periodically to provide capacitance in the system to allow for over spill to excess water. This can be represented in a multiphase flow with particles involved. Basically i have generated the mesh and the only thing left is to run the model with the particle transport.

Athanasios
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Proper way to name boundaries on 2D model for use in CFX? RossFS ANSYS Meshing & Geometry 4 November 10, 2011 03:38
Pros and Cons for CFX, CFdesign, COMSOL Val Main CFD Forum 3 June 10, 2011 03:20
CFX pressure in Simulations problem nasdak CFX 1 April 14, 2010 14:22
PhD using CFX Rui CFX 9 May 28, 2007 06:59
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07


All times are GMT -4. The time now is 19:00.