 |
 |
 |
|
|
|
[Sponsors] | ||||
January 8, 2002, 09:12
|
Post processing display problem
|
#1 |
|
Guest
Posts: n/a
|
Hi,
I have just recently started using cfx 5.5 and experiencinga few problems. I have drawn simple geometry's in buildand then run solver and got results. I then go intopost processor to load up data, it sometimes loads to 75% and at other times it doesn't load anything. I ampretty sure it is a displaying graphics probelms. Has anyone experienced anything similar to this or have any ideas how I could overcome this. Jennifer |
|
|
||
|
January 9, 2002, 00:49
|
Re: Post processing display problem
|
#2 |
|
Guest
Posts: n/a
|
May the problem be caused by graphic card driver. Try to use windows2000. May the problem be solved.
|
|
|
|
||
|
January 18, 2002, 12:01
|
Re: Post processing display problem
|
#3 |
|
Guest
Posts: n/a
|
Had a similar problem particularly on vector plots, and new graphics(meaning better)card fixed it immediately
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Post Processing Transient Data | chrisoturner | FLUENT | 2 | August 18, 2017 03:53 |
| Display Grid problem | Mohsin | FLUENT | 1 | March 12, 2010 04:45 |
| Surface of revolution problem in CFX Post | Mankim | CFX | 3 | January 5, 2010 06:38 |
| fluent for post processing | James | FLUENT | 0 | April 21, 2006 05:43 |
| Problem: graphics display in prostar main window | Jiaying Xu | Siemens | 8 | February 14, 2002 09:08 |
Linear Mode
