|
[Sponsors] |
April 15, 2001, 08:42 |
Gluing problems
|
#1 |
Guest
Posts: n/a
|
When I created the geo. file by running the analysis on a 3-D geometry, geo. file was created but the blocks are not glued in geo. file
|
|
April 22, 2001, 04:34 |
Re: Gluing problems
|
#2 |
Guest
Posts: n/a
|
You Can read "the Problem in creating .geo file", I think you will find how to deal with it.
|
|
April 25, 2001, 04:55 |
Re: Gluing problems
|
#3 |
Guest
Posts: n/a
|
Sabah, Please check your meshes. If the grids do not match then the blocks will not be glued.
Hope this will help. Monir |
|
May 8, 2001, 05:47 |
Re: Gluing problems
|
#4 |
Guest
Posts: n/a
|
hi
while creating blocks ,it should be such that cfx will be able to reblock it into a single block. also the reblock option should be "on". it all depends on the blocks and the mesh seeding you have given. another important thing is that while creating geomtries and blocks see that to the maximium they are parametric. it reduces your volume meshing and reblocking time as well. Regards, joseph.machnaim |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Problems with coedge curves and surfaces | tommymoose | ANSYS Meshing & Geometry | 6 | December 1, 2020 11:12 |
Needed Benchmark Problems for FSI | Mechstud | Main CFD Forum | 4 | July 26, 2011 12:13 |
Two-phase air water flow problems by activating Wall Lubrication Force | challenger85 | CFX | 5 | November 5, 2009 05:44 |
Some problems with Star CD | Micha | Siemens | 0 | August 6, 2003 13:55 |
Using Fluent for Geophysical Problems | Hassid Samuel | FLUENT | 0 | February 23, 2001 06:04 |