Generate a single wave that will dissipate as it travels

monjinz · February 24, 2017, 01:02

Hello, fellows

I am trying to generate a single wave (not a group of waves) in 2D CFX.

I think I have set up all the boundary conditions correctly and I was able to generate a single wave using a CEL expression.

But the problem is that the wave doesn't disappear (it travels to the other end)
I believe the wave must mitigate as it goes along the distance.

Do you have any idea/thoughts to generate such wave?
(should I use damping equation or something that will make the wave disappear?)

Any help will be appreciated.

Cheers

ghorrocks · February 24, 2017, 06:45

When I look at the ocean I see waves which travel for a very, very long distance so clearly they are very low dissipation and go a long way.

So if your case has the waves dissipating then something is causing it - it could be viscosity, or shallow water, or many other things. So if something is causing the dissipation then you should put that something in your model and it will show dissipation as well.

February 24, 2017, 01:02	Generate a single wave that will dissipate as it travels	#1
monjinz New Member Chan Joo Kim Join Date: Feb 2017 Posts: 5 Rep Power: 9	Hello, fellows I am trying to generate a single wave (not a group of waves) in 2D CFX. I think I have set up all the boundary conditions correctly and I was able to generate a single wave using a CEL expression. But the problem is that the wave doesn't disappear (it travels to the other end) I believe the wave must mitigate as it goes along the distance. Do you have any idea/thoughts to generate such wave? (should I use damping equation or something that will make the wave disappear?) Any help will be appreciated. Cheers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Single v.s. double precision	Confused	CFX	15	November 10, 2016 05:42
what's the difference between wave equation and single wave equation?	pswpswpsw	Main CFD Forum	1	June 17, 2014 11:45
Wave Rotor simulation	popezmark	OpenFOAM	8	February 4, 2014 19:00
DPM model w/ Wave model - errors in documentation	HS	FLUENT	0	April 12, 2006 05:37
P4 1.5 or Dual P3 800EB on Gibabyte board	Danial	FLUENT	4	September 12, 2001 12:44

February 24, 2017, 06:45		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	When I look at the ocean I see waves which travel for a very, very long distance so clearly they are very low dissipation and go a long way. So if your case has the waves dissipating then something is causing it - it could be viscosity, or shallow water, or many other things. So if something is causing the dissipation then you should put that something in your model and it will show dissipation as well.