CFX SOLVER parallel error

Manol · July 1, 2016, 13:26

Hi all... this is my firts post when i find any solution.

My problem is cfx solver...
When start mi .def file in solver, i select intel mpi distributes parallel;
Select and add host from list, and play run.

In cmd windows appaire :

Abort: unable to connect to host 1

The ANSYS CFX solver has terminated without writing a results
file. Command on host calcoloth04 exited with return code 0

I can not understand the problem..

i hope you can help me...

TNX

ghorrocks · July 2, 2016, 07:52

Does the simulation run when you do it serial? Does the tutorial examples run? Can you run a tutorial example in distributed parallel mode?

Manol · July 2, 2016, 08:15

Quote:

Originally Posted by ghorrocks

Does the simulation run when you do it serial? Does the tutorial examples run? Can you run a tutorial example in distributed parallel mode?

In serial and intel MPI local parallel mode no error.
But i selected Intel MPI distributed parallel , error remote host not found.
Show me error "command to host exited return with error 0"

ghorrocks · July 2, 2016, 09:06

Can you run a tutorial example in distributed parallel mode?

Have you followed the instructions to set up distributed parallel? It is not setup in the default installation, you need to do extra things to get it working.

Manol · July 2, 2016, 10:24

Quote:

Originally Posted by ghorrocks

Can you run a tutorial example in distributed parallel mode?

Have you followed the instructions to set up distributed parallel? It is not setup in the default installation, you need to do extra things to get it working.

i followed the instruction for distrubuted parallel... but when i add new host and start run... return error code 0

ghorrocks · July 3, 2016, 07:03

Do you get this for all simulations when you run distributed parallel?

If so you have a problem in your setup (obviously). The parallel setup instructions are accurate and detailed so make sure you are following them. You might need to re-do the parallel setup to fix up the thing you missed.

Manol · July 4, 2016, 14:38

ok...
in sequence i installed:

ansys 15.0
platform MPI. (Ibm and Intel)
open 8636 on windows firewall and add Exception
following the instructions.

When i started the simulation, i select Intel Mpi distributed parallel.
insert host and start run.

But th problem persist.

ghorrocks · July 4, 2016, 20:36

Does it work with platform MPI?

Manol · July 5, 2016, 03:53

Quote:

Originally Posted by ghorrocks

Does it work with platform MPI?

Everything works locally.
Intel MPI & IBM MPI not works in distributed.

Manol · July 5, 2016, 10:45

i resolve in part...
I have 5 host.

host 1, host 2, host 3, host 4 and host 5

When i try to
cfx5parallel -register-impi-user

and add host2, all ok... running start without error.

if try to add host3 with same command (
cfx5parallel -register-impi-user)

The simulation show me error:" Unable to connect host 2"

My question is: Cf5parallel can add only one host?
If i have more host to add?

what can i do?

tnx

Manol · July 5, 2016, 12:43

Updating....

I reinstall Ibm MPI & Intel MPI.

reset caching password...

Now INTEL MPI DISTRIBUTED RUN OK!

My configuration:

Windows server 2012 r2 with 4 Workstation xeon in lan.

the problem now is that I do not know what I did to make it work

July 1, 2016, 13:26	CFX SOLVER parallel error	#1
Manol New Member Join Date: Jul 2016 Posts: 7 Rep Power: 10	Hi all... this is my firts post when i find any solution. My problem is cfx solver... When start mi .def file in solver, i select intel mpi distributes parallel; Select and add host from list, and play run. In cmd windows appaire : Abort: unable to connect to host 1 The ANSYS CFX solver has terminated without writing a results file. Command on host calcoloth04 exited with return code 0 I can not understand the problem.. i hope you can help me... TNX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] blockMesh with double grading.	spwater	OpenFOAM Meshing & Mesh Conversion	92	January 12, 2019 10:00
error compiling modified applications	yvyan	OpenFOAM Programming & Development	21	March 1, 2016 05:53
Mesquite - Adaptive mesh refinement / coarsening?	philippose	OpenFOAM Running, Solving & CFD	94	January 27, 2016 10:40
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 19:00
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 18:51

July 2, 2016, 07:52		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	Does the simulation run when you do it serial? Does the tutorial examples run? Can you run a tutorial example in distributed parallel mode?

July 2, 2016, 09:06		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	Can you run a tutorial example in distributed parallel mode? Have you followed the instructions to set up distributed parallel? It is not setup in the default installation, you need to do extra things to get it working.

July 3, 2016, 07:03		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	Do you get this for all simulations when you run distributed parallel? If so you have a problem in your setup (obviously). The parallel setup instructions are accurate and detailed so make sure you are following them. You might need to re-do the parallel setup to fix up the thing you missed.

July 4, 2016, 14:38		#7
Manol New Member Join Date: Jul 2016 Posts: 7 Rep Power: 10	ok... in sequence i installed: ansys 15.0 platform MPI. (Ibm and Intel) open 8636 on windows firewall and add Exception following the instructions. When i started the simulation, i select Intel Mpi distributed parallel. insert host and start run. But th problem persist.

July 4, 2016, 20:36		#8
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	Does it work with platform MPI?

July 5, 2016, 10:45		#10
Manol New Member Join Date: Jul 2016 Posts: 7 Rep Power: 10	i resolve in part... I have 5 host. host 1, host 2, host 3, host 4 and host 5 When i try to cfx5parallel -register-impi-user and add host2, all ok... running start without error. if try to add host3 with same command ( cfx5parallel -register-impi-user) The simulation show me error:" Unable to connect host 2" My question is: Cf5parallel can add only one host? If i have more host to add? what can i do? tnx

July 5, 2016, 12:43		#11
Manol New Member Join Date: Jul 2016 Posts: 7 Rep Power: 10	Updating.... I reinstall Ibm MPI & Intel MPI. reset caching password... Now INTEL MPI DISTRIBUTED RUN OK! My configuration: Windows server 2012 r2 with 4 Workstation xeon in lan. the problem now is that I do not know what I did to make it work