CFX Solver Manager Error Code 1

Peta247 · June 2, 2016, 10:58

Hello guys, I have a 3D rectangular geometry with width-200mm height-100mm depth-60mm

I defined all the boundary conditions Outletx2,16 Inlets- set as (Inlet1 and inlet2 (8 each))

Inlets are small hoes with at area of 21mm
Outlets are 20x15mm

I am creating a 3D bus with inlets and outlets only, to figure out the steady state temperature.

I tried running the simulation with Solver manager but after sometime i get this error.

The ANSYS CFX solver exited with return code 1. No results file has been
created.

ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| Floating point exception: Overflow |
+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| Stopped in routine FPX: C_FPX_HANDLER |

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| The ANSYS CFX solver exited with return code 1. No results file |
| has been created.

PLEASE PLEASE PLEASE HELP!!!!

ghorrocks · June 2, 2016, 20:10

FAQ: http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F

Peta247 · June 4, 2016, 11:58

Thanks for your help

Peta247 · June 4, 2016, 12:00

I have another quick question, how can I export my mesh into Ansys workbench CFX from Abaqus CAE! When I tried this it doesn't recognise the geometry nor the mesh.

Please Help

June 2, 2016, 10:58	CFX Solver Manager Error Code 1	#1
Peta247 New Member Nomen Ose Join Date: Jun 2016 Location: Melbourne, Australia Posts: 19 Rep Power: 10	Hello guys, I have a 3D rectangular geometry with width-200mm height-100mm depth-60mm I defined all the boundary conditions Outletx2,16 Inlets- set as (Inlet1 and inlet2 (8 each)) Inlets are small hoes with at area of 21mm Outlets are 20x15mm I am creating a 3D bus with inlets and outlets only, to figure out the steady state temperature. I tried running the simulation with Solver manager but after sometime i get this error. The ANSYS CFX solver exited with return code 1. No results file has been created. ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| Floating point exception: Overflow \| +--------------------------------------------------------------------+ \| ERROR #001100279 has occurred in subroutine ErrAction. \| \| Message: \| \| Stopped in routine FPX: C_FPX_HANDLER \| +--------------------------------------------------------------------+ \| An error has occurred in cfx5solve: \| \| \| \| The ANSYS CFX solver exited with return code 1. No results file \| \| has been created. PLEASE PLEASE PLEASE HELP!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Help with element size	sandri_92	ANSYS Meshing & Geometry	14	November 14, 2018 08:54
thobois class engineTopoChangerMesh error	Peter_600	OpenFOAM	4	August 2, 2014 10:52
CFX solver doesn't start through Workbench	oj.bulmer	CFX	3	June 30, 2012 09:44
ATTENTION! Reliability problems in CFX 5.7	Joseph	CFX	14	April 20, 2010 16:45
problem in CFX solver about isolated volumes	Yuan	CFX	2	August 16, 2004 23:54

June 2, 2016, 20:10		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,870 Rep Power: 144	FAQ: http://www.cfd-online.com/Wiki/Ansys...do_about_it.3F

June 4, 2016, 11:58		#3
Peta247 New Member Nomen Ose Join Date: Jun 2016 Location: Melbourne, Australia Posts: 19 Rep Power: 10	Thanks for your help

June 4, 2016, 12:00		#4
Peta247 New Member Nomen Ose Join Date: Jun 2016 Location: Melbourne, Australia Posts: 19 Rep Power: 10	I have another quick question, how can I export my mesh into Ansys workbench CFX from Abaqus CAE! When I tried this it doesn't recognise the geometry nor the mesh. Please Help