Flow mode decomposition techniques in CFX

selvam2487 · March 26, 2016, 08:03

Hello Friends,

I have a question regarding the possibility of applying flow mode decomposition techniques (e.g., Proper orthogonal decomposition(POD)) in CFX. I use CFX for studying incompressible flow mixing in T-junctions using LES turbulence model.

I have recently read an article (http://www.sciencedirect.com/science...45793013003848) which uses this technique to find the dominant frequencies of an unsteady flow and the spatial modes associated with these frequencies.

I am interested to know if this could be done in CFX. Also, a simplified explanation of what this technique is could be helpful.

Thanks for the help in advance.

Regards,
Karthick

ghorrocks · March 28, 2016, 19:26

I suspect you know more about these techniques than me, so I will not be able to help you much. Also the paper is behind a paywall so I cannot see what the technique actually is. If you describe the technique you wish to apply then we might be able to help you apply it.

March 26, 2016, 08:03	Flow mode decomposition techniques in CFX	#1
selvam2487 Member Karthik Join Date: Oct 2012 Location: Germany Posts: 53 Rep Power: 14	Hello Friends, I have a question regarding the possibility of applying flow mode decomposition techniques (e.g., Proper orthogonal decomposition(POD)) in CFX. I use CFX for studying incompressible flow mixing in T-junctions using LES turbulence model. I have recently read an article (http://www.sciencedirect.com/science...45793013003848) which uses this technique to find the dominant frequencies of an unsteady flow and the spatial modes associated with these frequencies. I am interested to know if this could be done in CFX. Also, a simplified explanation of what this technique is could be helpful. Thanks for the help in advance. Regards, Karthick

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX siphon two phase flow - boundary conditions	bolus13	CFX	18	August 25, 2016 19:39
CFX - Solidworks Flow, Impeller comparison	aerospace_guy_	CFX	8	March 20, 2012 23:06
CFX Coronary Flow Simulation	ld1305	CFX	13	February 7, 2012 04:17
turbulence model in CFX, seperated flow	F. Bhuiyan	CFX	3	August 10, 2009 00:28
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 22:31

March 28, 2016, 19:26		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,852 Rep Power: 144	I suspect you know more about these techniques than me, so I will not be able to help you much. Also the paper is behind a paywall so I cannot see what the technique actually is. If you describe the technique you wish to apply then we might be able to help you apply it.