Solid body 2-axis Rotation Problem

hongsuny2333 · December 28, 2015, 23:30

I want the Z-axis Torque[N.m] calculation by CFX.

The Solid body is in fluid.
The Solid body is continuously rotated in the Z-axis and rotated by 90 degree repeatedly in the X-axis.

Is there any way?

Please. Help me.

ghorrocks · December 29, 2015, 06:13

There is a CEL expression to do this if it is a wall face: torque_z()@rotor surface

If it is a rigid body you can get it from the rigid body variables. See the reference manual for available variables.

hongsuny2333 · December 29, 2015, 19:26

Thanks. ghorrocks
My problem is how to express the motion of a solid body.
Is it possble Immersed solid?
or remeshing method?
or other easy way?

I wonder. Method for rotating the z, x direction in the one object.
I try MFR, Immersed solid but I'm fail.

fresty · December 30, 2015, 05:37

You may need to post some images of your current progress.
If i am not wrong, it could be done using any of the techniques or combination of techniques that you have mentioned.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sixDoFRigidBody with more than one body	fernexda	OpenFOAM Running, Solving & CFD	12	April 25, 2022 12:40
Problem with Axis of rotation in Periodic BC	mohammad	STAR-CCM+	2	September 5, 2014 06:33
OF 1.6 extend. GGI - rotation around two axis - C++ newbie needs help	A.Wendy	OpenFOAM Running, Solving & CFD	1	February 4, 2013 09:05
CFX 11.0 Linear Acceleration YES!! But Angular Acceleration NO??? Help Please.	jrl4444	CFX	14	January 7, 2013 15:10
Theory behind the solid domain rotation in fluid using Bets property	Riken	CFX	0	October 28, 2009 10:51

December 29, 2015, 06:13		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	There is a CEL expression to do this if it is a wall face: torque_z()@rotor surface If it is a rigid body you can get it from the rigid body variables. See the reference manual for available variables.

December 29, 2015, 19:26		#3
hongsuny2333 New Member yang hong sun Join Date: Jul 2014 Posts: 3 Rep Power: 12	Thanks. ghorrocks My problem is how to express the motion of a solid body. Is it possble Immersed solid? or remeshing method? or other easy way? I wonder. Method for rotating the z, x direction in the one object. I try MFR, Immersed solid but I'm fail.

December 30, 2015, 05:37		#4
fresty Senior Member Join Date: Aug 2014 Location: UK Posts: 213 Rep Power: 13	You may need to post some images of your current progress. If i am not wrong, it could be done using any of the techniques or combination of techniques that you have mentioned.