YPlus Value

ENGRTAHIR · October 23, 2014, 14:21

I am working on external flow of finned projectile in subsonic range, and use SST model for turbulence. I used Y+ value of 64 and also of 1.5 with hybrid mesh but my results are not compared with experimental. I use reference pressure 1atm and mach number is 0.5.
My inlet intensity is medium
Can anybody help me why its happening

Mason liu · October 24, 2014, 06:08

I'm not familiar with your case, but you may can try large region of Yplus(i.e. from 0.01-5, name it, 0.01/0.03/0.06/0.09/0.15/0.3/0.6/0.9,,,, or just typical value of those), just for sensitivity analysis, may find a good region of it.
Just try some small Yplus value, see if have significant influence on interested variable.

ENGRTAHIR · October 24, 2014, 11:52

Thanks for quick reply.
I worked on guided 155 finned projectile.
the servo fin and motor fin are both opened, and i used hybrid mesh for creating grid in ICEM CFD.
Will the hybrid mesh effect CP value. when my Wall Y+ is less than 100 then my results match but when Y+ is 1 then it deviate.
What i do?
also can you help me in mesh making

October 23, 2014, 14:21	YPlus Value	#1
ENGRTAHIR Member tahir Join Date: May 2010 Posts: 35 Rep Power: 16	I am working on external flow of finned projectile in subsonic range, and use SST model for turbulence. I used Y+ value of 64 and also of 1.5 with hybrid mesh but my results are not compared with experimental. I use reference pressure 1atm and mach number is 0.5. My inlet intensity is medium Can anybody help me why its happening

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] Contribution a new utility: refine wall layer mesh based on yPlus field	lakeat	OpenFOAM Community Contributions	58	December 23, 2021 03:36
Solver Yplus of Automatic wall treatment	justjhy	CFX	2	May 4, 2013 08:19
which yplus (SST)	sanchezz	CFX	17	January 11, 2010 05:45
Who stole my Yplus?	Chebeba	CFX	4	March 23, 2006 05:18
heat transfer coefficients with "bad" yplus	Andrew	Main CFD Forum	4	April 8, 1999 05:43

October 24, 2014, 06:08		#2
Mason liu New Member Mason Join Date: Sep 2014 Posts: 22 Rep Power: 12	I'm not familiar with your case, but you may can try large region of Yplus(i.e. from 0.01-5, name it, 0.01/0.03/0.06/0.09/0.15/0.3/0.6/0.9,,,, or just typical value of those), just for sensitivity analysis, may find a good region of it. Just try some small Yplus value, see if have significant influence on interested variable.

October 24, 2014, 11:52		#3
ENGRTAHIR Member tahir Join Date: May 2010 Posts: 35 Rep Power: 16	Thanks for quick reply. I worked on guided 155 finned projectile. the servo fin and motor fin are both opened, and i used hybrid mesh for creating grid in ICEM CFD. Will the hybrid mesh effect CP value. when my Wall Y+ is less than 100 then my results match but when Y+ is 1 then it deviate. What i do? also can you help me in mesh making