Flexible Wall

sunilpatil · September 2, 2014, 12:21

Hello Sir,
I am interested to simulate flow over flexible aerofoil in Ansys CFX, but i am unable to find how to define wall as flexible. I am having the required equation to account wall flexibility.
I have searched lot in electronic media and most of them are used FSI (Fluid structure interaction). Is there any other way to model this problem without using FSI.

Opaque · September 2, 2014, 13:05

If you know how the wall will respond to the acting forces, write the equation here and someone may be able to guide you on how to do it using CEL in conjunction mesh deformation/motion.

Without the expression, it is nearly impossible for anyone to guess what the expression dependencies are, nor which variables are readily available for use.

September 2, 2014, 12:21	Flexible Wall	#1
sunilpatil Senior Member sunil Join Date: Jul 2012 Location: Bangalore Posts: 179 Rep Power: 14	Hello Sir, I am interested to simulate flow over flexible aerofoil in Ansys CFX, but i am unable to find how to define wall as flexible. I am having the required equation to account wall flexibility. I have searched lot in electronic media and most of them are used FSI (Fluid structure interaction). Is there any other way to model this problem without using FSI.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Conjugate Heat Transfer: Wall Heat Flux at Coupled Walls?	MaxHeat	FLUENT	4	September 14, 2017 11:44
Very technical question about solving wall boundary layer ...	jlb001	FLUENT	6	December 27, 2014 06:56
[Commercial meshers] tmerge utility creates unwanted interface/walls comes in the final mesh	Shoonya	OpenFOAM Meshing & Mesh Conversion	11	January 20, 2012 07:23
UDF for wall slipping	HFLUENT	Fluent UDF and Scheme Programming	0	April 27, 2011 13:03
Quick Question - Wall Function	D.Tandra	Main CFD Forum	2	March 16, 2004 05:29

September 2, 2014, 13:05		#2
Opaque Senior Member Join Date: Jun 2009 Posts: 1,880 Rep Power: 33	If you know how the wall will respond to the acting forces, write the equation here and someone may be able to guide you on how to do it using CEL in conjunction mesh deformation/motion. Without the expression, it is nearly impossible for anyone to guess what the expression dependencies are, nor which variables are readily available for use.