negative efficiency of centrifugal pump

AdhavRohit · December 24, 2013, 09:09

please help someone.

my simulation is converging without showing any reverse flow. but the result is

negative efficiency
negative head generated

flow rate is ok.

ARohit · December 26, 2013, 00:22

please help somebody..

I tried every possibility..
changing mesh,
boundary condition
time step factor ... and what not...

thanks from heart.. !!

ghorrocks · December 26, 2013, 05:18

Are you sure you have the rotation and torque vectors defined correctly? And the flow set up correctly? Have you manually calculated the rotor torque and rotation to check it makes sense?

December 26, 2013, 00:22	Please help somebody..i am still sttuck.	#2
ARohit New Member Bitte56 Join Date: Mar 2013 Location: India Posts: 15 Rep Power: 13	please help somebody.. I tried every possibility.. changing mesh, boundary condition time step factor ... and what not... thanks from heart.. !!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 18:22
centrifugal Pump Efficiency	A.farid	Main CFD Forum	0	March 31, 2012 08:39
[blockMesh] error message with modeling a cube with a hold at the center	hsingtzu	OpenFOAM Meshing & Mesh Conversion	2	March 14, 2012 10:56
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 15:11
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 15:00

December 26, 2013, 05:18		#3
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,871 Rep Power: 144	Are you sure you have the rotation and torque vectors defined correctly? And the flow set up correctly? Have you manually calculated the rotor torque and rotation to check it makes sense?