advise needed - nozzle problem

Sally · April 5, 2013, 14:22

-----------------------------------

ghorrocks · April 6, 2013, 06:21

Please post an image of what you are modelling, the water column which is the wrong shape and what shape you expect it to be. Also include an image of your mesh.

Sally · April 8, 2013, 12:37

-----------------------

ghorrocks · April 8, 2013, 19:27

In my experience on this forum when people post an image of what they are seeing then 95% of the time the issue becomes apparent and it is not related to what the original post writer thought was important.

So if you cannot post an image I do not think we are going to get very far.

If the image is confidential then post an image which does not show the confidential bits. Or develop a non-confidential simulation which shows the same behaviour but can be shown publically.

Sally · April 11, 2013, 14:24

Thank you very much for replying and trying to help me out. Just wanted to let you know that I solved the problem.

Lance · April 12, 2013, 03:24

The whole point of this forum is that it can be used to help people with their CFX problems. You are not really helpful by deleting your posts and say "I solved the problem"

relevant xkcd: http://xkcd.com/979/

April 5, 2013, 14:22	advise needed - nozzle problem	#1
Sally New Member Join Date: Apr 2013 Posts: 3 Rep Power: 13	----------------------------------- Last edited by Sally; April 11, 2013 at 14:10.

April 8, 2013, 12:37		#3
Sally New Member Join Date: Apr 2013 Posts: 3 Rep Power: 13	----------------------- Last edited by Sally; April 11, 2013 at 14:10.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stability Problem with sonicFoam for Nozzle Flow	Julian K.	OpenFOAM	3	July 11, 2016 09:14
[ICEM] Problem with a nozzle and ambient volume	Davide_sd	ANSYS Meshing & Geometry	6	December 15, 2012 07:53
FSI problem , Help needed for my basic questions	kmgraju	CFX	1	July 29, 2011 01:04
Nozzle 2D flow problem	Alamaas	Main CFD Forum	0	August 26, 2009 03:41
Nozzle Problem	Johannes	Main CFD Forum	1	October 9, 2007 16:16

April 6, 2013, 06:21		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	Please post an image of what you are modelling, the water column which is the wrong shape and what shape you expect it to be. Also include an image of your mesh.

April 8, 2013, 19:27		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,872 Rep Power: 144	In my experience on this forum when people post an image of what they are seeing then 95% of the time the issue becomes apparent and it is not related to what the original post writer thought was important. So if you cannot post an image I do not think we are going to get very far. If the image is confidential then post an image which does not show the confidential bits. Or develop a non-confidential simulation which shows the same behaviour but can be shown publically.

April 11, 2013, 14:24		#5
Sally New Member Join Date: Apr 2013 Posts: 3 Rep Power: 13	Thank you very much for replying and trying to help me out. Just wanted to let you know that I solved the problem.

April 12, 2013, 03:24		#6
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 22	The whole point of this forum is that it can be used to help people with their CFX problems. You are not really helpful by deleting your posts and say "I solved the problem" relevant xkcd: http://xkcd.com/979/