|
[Sponsors] |
February 19, 2013, 17:52 |
Remeshing
|
#1 |
New Member
Niklas Muench
Join Date: Feb 2013
Posts: 1
Rep Power: 0 |
Hi,
I have encountered a problem with my transient simulation, which has a rigid body object in it. Due to large mesh deformation and negative volume element errors the simulation breaks at some point, and I should perform remeshing, and I have to do it with Workbench, because everything is set up there. I used the reference below as a remeshing guide. http://www.edr.no/blogg/ansys_blogge...nch_cfx_remesh and used cfx locator-based functions to monitor the location of the rigid body in the course of simulation. (It is not possible in my case to predict the location like the tutorial.) I gave the monitors the exact name I gave my designmodeler input parameters in the workbench. But when the simulation interrupts and the script is executed, I can only get the initial mesh. Workbench cannot recognize the actual value of location parameters from solver manager. I really appreciate your help, because I have been stuck here for days. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ICEM CFD remeshing error | raminmir | CFX | 7 | October 30, 2014 04:56 |
Remeshing with User Defined Options | ChristianF | CFX | 2 | September 24, 2014 10:19 |
ICEM CFD Replay Remeshing | EvaS | CFX | 1 | December 19, 2012 20:30 |
Bugg in Remeshing in 3D - Any Fluent Wizards ?? | Amr | FLUENT | 1 | November 1, 2011 05:04 |
Dynamic Grid Remeshing causing Divergence? | Andrew Wick | FLUENT | 0 | January 23, 2006 19:39 |