exports geometry workbench to ICEM

TallesC · November 30, 2012, 09:23

hello, I'm trying to export a geometry of a pipe workbench to ICEM, but the centerline of the pipe is not appearing in Icem, I need this line to generate the mesh, I've tried exporting in different types of extension (IGS, Parasolid) but it did not work! please help me?

ghorrocks · December 1, 2012, 05:15

Why do you need the centreline to generate the mesh? This is not normal mesh generation procedure.

TallesC · December 1, 2012, 12:37

I need this line to facilitate the creation of the blocks to generate the mesh in Icem, you know if it is possible to export geometry with the central line that was used to make the geometry of the design workbench??

ghorrocks · December 1, 2012, 15:50

This question is best asked on the geometry and meshing forum.

I think ICEM has functions to get the centre point of an arc. You can easily regenerate the centreline from that. Would that be adequate?

TallesC · December 1, 2012, 16:08

I need to check if the program does this operation, I'm thinking that the center line does not appear in ICEM because this line was created in the design workbench to generate solid, anyway thanks for the tip!

November 30, 2012, 09:23	exports geometry workbench to ICEM	#1
TallesC Senior Member Talles Caio Join Date: Oct 2012 Location: Brazil Posts: 101 Rep Power: 14	hello, I'm trying to export a geometry of a pipe workbench to ICEM, but the centerline of the pipe is not appearing in Icem, I need this line to generate the mesh, I've tried exporting in different types of extension (IGS, Parasolid) but it did not work! please help me?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEM Fuel cell module meshes. ICEM vs workbench	aarvay	FLUENT	24	March 2, 2020 07:50
[ANSYS Meshing] Simple question.... :) Export ICEM mesh to Workbench	Craig	ANSYS Meshing & Geometry	4	April 4, 2014 20:25
[ICEM] Meshing adjacent wall geometry and simple ICEM questions	everdimension	ANSYS Meshing & Geometry	25	June 20, 2012 05:25
[ICEM] Best way to import geometry ICEM	Cottbus	ANSYS Meshing & Geometry	4	June 12, 2012 10:42
2D geometry in ICEM	NITIN DEWANGAN	CFX	3	August 21, 2008 18:25

December 1, 2012, 05:15		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,870 Rep Power: 144	Why do you need the centreline to generate the mesh? This is not normal mesh generation procedure.

December 1, 2012, 12:37		#3
TallesC Senior Member Talles Caio Join Date: Oct 2012 Location: Brazil Posts: 101 Rep Power: 14	I need this line to facilitate the creation of the blocks to generate the mesh in Icem, you know if it is possible to export geometry with the central line that was used to make the geometry of the design workbench??

December 1, 2012, 15:50		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,870 Rep Power: 144	This question is best asked on the geometry and meshing forum. I think ICEM has functions to get the centre point of an arc. You can easily regenerate the centreline from that. Would that be adequate?

December 1, 2012, 16:08		#5
TallesC Senior Member Talles Caio Join Date: Oct 2012 Location: Brazil Posts: 101 Rep Power: 14	I need to check if the program does this operation, I'm thinking that the center line does not appear in ICEM because this line was created in the design workbench to generate solid, anyway thanks for the tip!