How to get transient results

sjtusyc · June 8, 2012, 09:34

How can i get transient results that stored in .trn files ?
EX.
I want to get the massFlow at different timestep simultaneously, i wish it is listed in one .cse or excel file.

evcelica · June 9, 2012, 09:57

Add the timesteps in CFD-Post.
Create a transient chart.
put X axis as time, Y as what you want to evaluate (create expression for massflow)
you can then export this into excel if you wish.

sjtusyc · June 10, 2012, 07:08

Quote:

Originally Posted by evcelica

Add the timesteps in CFD-Post.
Create a transient chart.
put X axis as time, Y as what you want to evaluate (create expression for massflow)
you can then export this into excel if you wish.

evcelica,thank you for your reply,what do you mean "Add the timesteps in CFD-Post".

evcelica · June 10, 2012, 11:34

if you have opened the results file which contains all the transient results, then all the transient results will already be in post. You would only have to add them if they weren't there already. So you probably won't have to do this.

sjtusyc · June 12, 2012, 07:19

Quote:

Originally Posted by evcelica

if you have opened the results file which contains all the transient results, then all the transient results will already be in post. You would only have to add them if they weren't there already. So you probably won't have to do this.

Thank you so much ,I got it and it works out .

EDesrosiers · December 29, 2012, 15:33

Hi,
Sorry for the newbi question,

I want to do the same thing (transient graph, xaxis=time, yaxis=wall heat flux on a wall)
How do you setup that?

Thanks

sjtusyc · January 3, 2013, 06:39

[QUOTE=EDesrosiers;399408]Hi,
Sorry for the newbi question,

I want to do the same thing (transient graph, xaxis=time, yaxis=wall heat flux on a wall)
How do you setup that?

Please try CEL and graph.

June 8, 2012, 09:34	How to get transient results	#1
sjtusyc Member leo Join Date: Jun 2012 Posts: 98 Rep Power: 14	How can i get transient results that stored in .trn files ? EX. I want to get the massFlow at different timestep simultaneously, i wish it is listed in one .cse or excel file.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Time averaging results from a transient run	Flow Squad	CFX	4	October 24, 2011 10:11
transient simulation of a rotating rectangle	icesniffer	CFX	1	August 8, 2009 08:25
Combining Transient results after a backup	Dre	CFX	9	February 18, 2008 09:43
intermediate results during a transient run	Michael Skoblin	CFX	1	September 25, 2006 15:00
Minimal transient result lokks like full in Post	Korsh Mik	CFX	14	July 19, 2005 03:45

June 9, 2012, 09:57		#2
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,188 Rep Power: 23	Add the timesteps in CFD-Post. Create a transient chart. put X axis as time, Y as what you want to evaluate (create expression for massflow) you can then export this into excel if you wish.

June 10, 2012, 11:34		#4
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,188 Rep Power: 23	if you have opened the results file which contains all the transient results, then all the transient results will already be in post. You would only have to add them if they weren't there already. So you probably won't have to do this.

December 29, 2012, 15:33		#6
EDesrosiers New Member Etienne Desrosiers Join Date: Dec 2012 Posts: 1 Rep Power: 0	Hi, Sorry for the newbi question, I want to do the same thing (transient graph, xaxis=time, yaxis=wall heat flux on a wall) How do you setup that? Thanks

January 3, 2013, 06:39		#7
sjtusyc Member leo Join Date: Jun 2012 Posts: 98 Rep Power: 14	[QUOTE=EDesrosiers;399408]Hi, Sorry for the newbi question, I want to do the same thing (transient graph, xaxis=time, yaxis=wall heat flux on a wall) How do you setup that? Please try CEL and graph.