Natural Convection in 2D Rectangular Open Channels

Suriya Narayanan · June 24, 2021, 11:40

I would like some help from freelancers to run a large computation file. Consider a 2D rectangular plane of height 840 mm and width 0.42 mm. I wanted to establish a quadrilateral mesh of size 0.0105 mm, which will result in 3.4 million elements in the plane. My 8 GB RAM machine would not pass the meshing stage because of the large computation load. Can someone help me with meshing and the solving part?

The fluid properties and boundary conditions are known and could be shared.

Fluent ES · June 26, 2021, 08:24

I will be pleased to help you with meshing and solving the problem using CFD. You can reach me on "cfd-solution@fluent-es.in".

Regards,
Manish

June 24, 2021, 11:40	Natural Convection in 2D Rectangular Open Channels	#1
Suriya Narayanan New Member Suriya Narayanan Join Date: Jun 2021 Posts: 1 Rep Power: 0	I would like some help from freelancers to run a large computation file. Consider a 2D rectangular plane of height 840 mm and width 0.42 mm. I wanted to establish a quadrilateral mesh of size 0.0105 mm, which will result in 3.4 million elements in the plane. My 8 GB RAM machine would not pass the meshing stage because of the large computation load. Can someone help me with meshing and the solving part? The fluid properties and boundary conditions are known and could be shared.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using PengRobinsonGas EoS with sprayFoam	Jabo	OpenFOAM Running, Solving & CFD	36	July 16, 2024 04:52
[swak4Foam] swak4foam for OpenFOAM 4.0	mnikku	OpenFOAM Community Contributions	80	May 17, 2022 09:06
[swak4Foam] funkyDoCalc with OF2.3 massflow	NiFl	OpenFOAM Community Contributions	14	November 25, 2020 04:30
OpenFOAM without MPI	kokizzu	OpenFOAM Installation	4	May 26, 2014 10:17
[swak4Foam] Error bulding swak4Foam	sfigato	OpenFOAM Community Contributions	18	August 22, 2013 13:41

June 26, 2021, 08:24		#2
Fluent ES New Member Manish Join Date: Mar 2021 Location: India Posts: 2 Rep Power: 0	I will be pleased to help you with meshing and solving the problem using CFD. You can reach me on "cfd-solution@fluent-es.in". Regards, Manish