Conjugate Heat Transfer simulation of AFPM electric generator

AlexRonto · August 22, 2017, 11:56

Hi,

I am doing a CHT simulation using ANSYS Fluent for an Axial Flux Permanent Magnet machine (disks rotating in open atmosphere with a stator rim in the middle).

I have experimental measurements of the temperatures reached at the coils of the generator and I want to build a model validated with these experimental results. The problem is that the results I get do not match with the experimental ones. I have tried out different meshes, boundary conditions, solver settings but none of them worked till now..

I need help

Thank you in advance,
Alexandros Rontogianis

AlexRonto · September 5, 2017, 07:32

Anyone experienced with such kind of simulations?

P.S.: I would appreciate any advice provided, however I prefer someone to take full responsibility of the simulation. I am running out of time, so please help!

Best Regards,
Alex

silambarasan7 · September 6, 2017, 00:50

Helloo,
I can help you

rohansharmafree · September 13, 2017, 12:09

I have good experience in CFD analysis and mesh generation. I can help you in the analysis. Please mail me at rohansharmafree@gmail.com

einandr · September 18, 2017, 04:23

Hi, if the problem is not solved, please contact me with more details. I show you my job examples if needed. We may discuss on skype.

August 22, 2017, 11:56	Conjugate Heat Transfer simulation of AFPM electric generator	#1
AlexRonto New Member Alexandros Join Date: Jun 2016 Posts: 28 Rep Power: 10	Hi, I am doing a CHT simulation using ANSYS Fluent for an Axial Flux Permanent Magnet machine (disks rotating in open atmosphere with a stator rim in the middle). I have experimental measurements of the temperatures reached at the coils of the generator and I want to build a model validated with these experimental results. The problem is that the results I get do not match with the experimental ones. I have tried out different meshes, boundary conditions, solver settings but none of them worked till now.. I need help Thank you in advance, Alexandros Rontogianis

September 6, 2017, 00:50	Conjugate heat transfer expert	#3
silambarasan7 Member sila Join Date: Jul 2013 Posts: 32 Rep Power: 13	Helloo, I can help you

September 13, 2017, 12:09	Hello	#4
rohansharmafree New Member Rohan sharma Join Date: Dec 2015 Posts: 28 Rep Power: 10	I have good experience in CFD analysis and mesh generation. I can help you in the analysis. Please mail me at rohansharmafree@gmail.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thermal non-equilibrium porous media model with conjugate heat transfer	Hexahedron	FLUENT	9	February 22, 2023 03:55
Question about heat transfer simulation convergence	Anna Tian	CFX	27	January 13, 2021 15:43
Error - Solar absorber - Solar Thermal Radiation	MichaelK	CFX	12	September 1, 2016 06:15
Question about heat transfer coefficient setting for CFX	Anna Tian	CFX	1	June 16, 2013 07:28
Heat transfer in an unsteady-state simulation	Raed141	FLUENT	11	August 7, 2009 18:17

September 5, 2017, 07:32		#2
AlexRonto New Member Alexandros Join Date: Jun 2016 Posts: 28 Rep Power: 10	Anyone experienced with such kind of simulations? P.S.: I would appreciate any advice provided, however I prefer someone to take full responsibility of the simulation. I am running out of time, so please help! Best Regards, Alex

September 18, 2017, 04:23		#5
einandr New Member Andrey Yakovchuk Join Date: Nov 2012 Posts: 24 Rep Power: 14	Hi, if the problem is not solved, please contact me with more details. I show you my job examples if needed. We may discuss on skype.