Unable to input fluid to flow in a hollow pipe

Mrsimple · March 16, 2016, 13:53

Good day to online surfers, how do I capture the volume mesh for a hollow pipe that fluids are able to flow inside? If it is a solid pipe, I would have problems inputting the thickness into it. The hollow pipe is chosen so that I could have a thickness for the simulation. Please help! There is nothing going in and out. Moreover, I am doing a natural convection problem and the temperature of the outer surface temperature profile is not captured. There is also a problem is the flow reversal, how do I go about solving these problems? Thank you very much!

I had tried on another piece of solid pipe, I am wondering does this mean that fluid is inside??

Igor_Kaplun · March 21, 2016, 07:04

Hi!
If your project still actual, please send me all information at
kaplunip[at]gmail[dot]com.
Regards, Igor Kaplun

ksingh · March 22, 2016, 04:53

I can resolve your problem within a day. Mail me
ksingh[at]tserc[dot]in

Mrsimple · March 22, 2016, 06:18

I apologize Igor and Ksingh, I posted this at the wrong platform. I do not have the money to get the service!

March 16, 2016, 13:53	Unable to input fluid to flow in a hollow pipe	#1
Mrsimple New Member Henry Join Date: Mar 2016 Posts: 9 Rep Power: 10	Good day to online surfers, how do I capture the volume mesh for a hollow pipe that fluids are able to flow inside? If it is a solid pipe, I would have problems inputting the thickness into it. The hollow pipe is chosen so that I could have a thickness for the simulation. Please help! There is nothing going in and out. Moreover, I am doing a natural convection problem and the temperature of the outer surface temperature profile is not captured. There is also a problem is the flow reversal, how do I go about solving these problems? Thank you very much! I had tried on another piece of solid pipe, I am wondering does this mean that fluid is inside?? Last edited by Mrsimple; March 16, 2016 at 15:48.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pulsatile flow at inlet of pipe model	amsys	CFX	5	July 20, 2016 14:18
Setting boundary conditions for simple pipe flow with flow direction changing in time	Sipher	FLUENT	1	May 4, 2015 21:05
[OpenFOAM] Paraview 3.98 - errors when saving geometry file	pajot	ParaView	1	September 28, 2013 11:45
CFX fails to calculate a diffuser pipe flow	shenying0710	CFX	7	March 26, 2013 05:13
Double Walled Pipe Boundary	dahvqaz	FLUENT	2	December 5, 2012 11:14

March 21, 2016, 07:04		#2
Igor_Kaplun New Member Igor Join Date: Feb 2014 Posts: 3 Rep Power: 12	Hi! If your project still actual, please send me all information at kaplunip[at]gmail[dot]com. Regards, Igor Kaplun

March 22, 2016, 04:53		#3
ksingh Member Kuldeep Join Date: Mar 2016 Posts: 33 Rep Power: 10	I can resolve your problem within a day. Mail me ksingh[at]tserc[dot]in

March 22, 2016, 06:18		#4
Mrsimple New Member Henry Join Date: Mar 2016 Posts: 9 Rep Power: 10	I apologize Igor and Ksingh, I posted this at the wrong platform. I do not have the money to get the service!