Simulation of a Marine Propeller

gaurav11 · April 22, 2014, 09:22

Hi, I am performing simulation using FLUENT on a Marine propeller. I have created the geometry and tried to simulate it with unstructured grid using ICEM. The results are not consistent. Can anyone please help me out, to resolve the issue?
I need someone who can give some idea about multiphase and single phase simulation using rotating reference frame. I will pay for that as I am looking for a freelancer to teach me something about this issues.

Thanks
Gaurav

Seno_Bayu · May 8, 2014, 08:11

Hi, I'm Seno.

Did you ever make a model using ANSYS Blade Modeler (BladeGen) and Turbogrid to construct grid the runner especially arround the blade?
ICEM can be used to create the grid of stationary part that does not contain the blade.

Cavitation analysis can be performed with a single-phase models, the condition can be detected on the static pressure of the simulation results.

Good luck

Ramkumayadav.joga · May 22, 2014, 11:17

Hai,
I am from marine background and i am currently working on Marine propellers, cavitation and stress analysis on highly skewed propellers.I have done validation of KCS, KVLCC and some consultancy works on wake prediction. I would be happy to help in solving your problem. You can contact me on my mail ramk3983@gmail.com

April 22, 2014, 09:22	Simulation of a Marine Propeller	#1
gaurav11 New Member Gaurav Join Date: Jul 2013 Location: India Posts: 25 Rep Power: 13	Hi, I am performing simulation using FLUENT on a Marine propeller. I have created the geometry and tried to simulate it with unstructured grid using ICEM. The results are not consistent. Can anyone please help me out, to resolve the issue? I need someone who can give some idea about multiphase and single phase simulation using rotating reference frame. I will pay for that as I am looking for a freelancer to teach me something about this issues. Thanks Gaurav

May 8, 2014, 08:11	Simulation of a Marine Propeller	#2
Seno_Bayu New Member Seno Bayu Join Date: May 2014 Posts: 1 Rep Power: 0	Hi, I'm Seno. Did you ever make a model using ANSYS Blade Modeler (BladeGen) and Turbogrid to construct grid the runner especially arround the blade? ICEM can be used to create the grid of stationary part that does not contain the blade. Cavitation analysis can be performed with a single-phase models, the condition can be detected on the static pressure of the simulation results. Good luck

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
full simulation of an aircraft with propeller effect	kdrbrk	FLUENT	3	January 17, 2024 04:08
Quadrotor helicopter propeller simulation	Attesz	CFX	14	December 4, 2017 16:45
Propeller calculation	toil	CFX	15	May 22, 2017 05:06
Convergence of jet flow simulation	MiraLisa	FLUENT	0	August 15, 2013 05:44
Propeller Simulation	Craig Paxton	FLUENT	11	February 17, 2010 00:57

May 22, 2014, 11:17		#3
Ramkumayadav.joga New Member ram Kumar Joga Join Date: Mar 2013 Posts: 1 Rep Power: 0	Hai, I am from marine background and i am currently working on Marine propellers, cavitation and stress analysis on highly skewed propellers.I have done validation of KCS, KVLCC and some consultancy works on wake prediction. I would be happy to help in solving your problem. You can contact me on my mail ramk3983@gmail.com