|
[Sponsors] |
URGENT-Simple Oil pump simulation using STAR CCM+ |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 21, 2013, 15:29 |
URGENT-Simple Oil pump simulation using STAR CCM+
|
#1 |
New Member
Join Date: Jul 2013
Location: UK
Posts: 3
Rep Power: 13 |
Hello Everyone,
I have a basic spur gear type OIL PUMP model which was created using CATIA software. This model has to be simulated using STAR CCM+ software to find PRESSURE and TEMPERATURE by studying the internal fluid flow from the inlet and outlet of the pump through GEAR TEETHS. If anybody could do this work with a report explaining the steps involved in creating the simulation as soon as possible will be much appreciated. With this helpful work, I can further simulate the pump model to get the optimum PRESSURE and TEMPERATURE by changing gear and other dimensions in the pump model. I have attached model pictures in ppt file. Please check out and I request anyone who can do this work or can introduce to somebody regarding this to reply. Best regards |
|
July 21, 2013, 15:42 |
|
#2 |
New Member
Join Date: Jul 2013
Location: UK
Posts: 3
Rep Power: 13 |
Attached file exceeded the max file size. I can mail you the model.
Thank you |
|
July 24, 2013, 15:43 |
|
#3 | |
New Member
Hemen Shah
Join Date: Jul 2013
Posts: 29
Rep Power: 13 |
Quote:
Hi-Tech outsourcing Services, an ISO certified company can help you simulate the model. Please visit :http://bit.ly/Hi-Tech-CAE-FEA-CFD-Services http://bit.ly/Hi-Tech-CFD-Case-Study We will be happy to get associated with you by extending these services at cost effective rates. Regards, Hemen Shah Hi-Tech Outsourcing Services Cell: +91-898-053-3725 | Office: +91-794-000-3212 | Web: HiTechOS.com |
||
July 24, 2013, 16:20 |
|
#4 |
New Member
Join Date: Jul 2013
Location: UK
Posts: 3
Rep Power: 13 |
Thanks for the response. Can you give your mail id so that I can mail the model file.
|
|
July 24, 2013, 16:39 |
|
#5 | |
New Member
Hemen Shah
Join Date: Jul 2013
Posts: 29
Rep Power: 13 |
Quote:
Regards Hemen Shah. |
||
October 26, 2013, 03:59 |
|
#6 |
Member
Join Date: Mar 2009
Posts: 32
Rep Power: 17 |
Hello Race7373
In total I have experience of six years in CFD with STAR CCM+ FLUENT & CFX softwares. I have been work on with STAR CCM with Moving dynamic mesh and overset mesh for around one and half year. Since overset mesh mesh was released in STAR. I can certainly help you with motion build and overall pump analysis. Mail me at udayrg@gmail.com regards Uday |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Validation of Star CCM+ simulation? | Alamaas | STAR-CCM+ | 9 | June 29, 2013 04:32 |
Assistance in Vacuum pump simulation | enr_venkat | CFX | 5 | November 20, 2012 12:50 |
how to open star ccm 6.04 version file in older versions | pritam.edke | Siemens | 2 | June 25, 2012 04:14 |
Urgent star ccm help | itsme_kit | Siemens | 4 | February 2, 2012 18:54 |
Salome and Code Saturne simulation of simple room and objects | cristian.ocnarescu | Main CFD Forum | 0 | June 21, 2010 11:19 |