wyldckat

Greetings to all!

This is an open letter to all OpenFOAM users that wish to contact me asking about problems they are having with OpenFOAM.

Please ask in the public forum. There is a good forum thread that explains how to get: https://www.cfd-online.com/Forums/op...-get-help.html

Private messages sent to me should only be used if and only if:

• If you want me to send you my work email address, due to paid support that you

...

This blog post is meant to centralize my efforts for providing gcc build scripts to the OpenFOAM community. It provides build scripts for gcc 4.3.x, 4.4.x and 4.5.x series.

NOTE: If you don't have internet on the computer where you want to run this script, you can still run these scripts, because they will provide you with instructions on which files to download and where to place them!

These scripts are based on the scripts provided with the patches for cross-compiling...

<-- Related issues to ParaView with OpenFOAM - Fixes and solutions


NOTE - New instructions available here: Using the official pre-built ParaView 3.10.1 version with OpenFOAM
NOTE 2: Instructions for doing a custom build: Building ParaView 3.8.0 with custom Qt 4.6.3

_________________________________________________
Greetings to all!

[When this post was first written] Less than a month ago OpenFOAM 1.7.0 was released. With it also came ParaView...

Well, I've been meaning to this for a while now, so here goes - This a list of threads that could prove useful to new comers to OpenFOAM on how to build it as well as the Third Party tools.

Keep in mind:

• That this isn't going to answer all of the questions you might have, but should help you with the more usual issues you might have.
• The solution you seek might only come along after reading most of the thread each link points to.

Due to blog post constraint to 10000...

In order to reduce entropy from the documentation project thread, I've edited my post and moved the stuff that was just clutter to this blog post, for future reference.
----

(starts here)

Not wanting to overdo my time on this soapbox/post, but I think that it would be best to create a project that completes OpenFOAM's existence, rather than creating another clone. Unless, of course, those willing to create the fork actually want to evolve it's infrastructure to a...