wyldckat

This blog post provides a complete answer to Tobias Holzmann's following post at LinkedIn: https://www.linkedin.com/feed/update...72321633218560

This is because LinkedIn has a limited number of characters per comment and it required me to login in order to read the complete post... so I guess it's better that I answer here instead.

-----------

Hi Tobi and greetings to all!

Since you mentioned me here, I guess I have to answer here as...

This is the third part of a long blog post, see the first part here and the second here.

On the 30th:

• I arrived at around 08h10, had to meet+talk with Miguel Nóbrega to see how the clinics sessions were going to be organized.
• The first (and only) lecture was given by Fred Mendonça, with the title "Custodians of OpenFOAM®".
  • He told us about his career experience. In a nutshell: a lot of experience, both CFD and business/management!
  • Told us and showed us a map

...

This is the second part of a long blog post, see the first part here.

Continuing about the 29th:

• Next was Robin Knowles presentation, with a pretty awesome presentation on the first season of 12 pod-casts he's done with CFD experts, although mostly oriented to the business side of things. He told us a bit about himself and his career; then he gave the highlights of the podcasts.
  • One of the highlights that stuck with me was the one about Patrick Hanley of Hanley Innovations,

...

While the latest OpenFOAM-dev and 4.0 snapshots are building on my machine, I'm taking the opportunity to write a bit of what happened at the 11th community OpenFOAM Workshop this year (2016), at least from my point of view. I'm not going to write everything, otherwise it would be a short book, including information that was damaged due to memory compression in my mind.

I've been using OpenFOAM since 2009 and only this year did I finally manage to go to an international community workshop...

This blog post contains the rants that I pruned out from my original draft for the post #13 on this thread: http://www.cfd-online.com/Forums/ope...am-v3-0-a.html

The rants are listed by section:

Where I stand in all of this (aka Disclaimer of intentions)

[RANT]
I started looking into OpenFOAM in late 2008, beginning of 2009, because at the company I work at, we needed to use OpenFOAM on Microsoft's Windows OS. As a result - and a fun...