Related issues to ParaView with OpenFOAM - Fixes and solutions
Posted January 23, 2011 at 00:54 by wyldckat
Updated May 1, 2016 at 18:53 by wyldckat (Re-structured to be more legible)
Updated May 1, 2016 at 18:53 by wyldckat (Re-structured to be more legible)
<-- List of threads useful for building OpenFOAM and other Third Party tools
ParaView related topics - divided into two major topics:
Building Paraview:
Problems with Visualization:
ParaView related topics - divided into two major topics:
Building Paraview:
- On how to build ParaView X.X.X with a custom Qt Y.Y:
- Building ParaView 3.10.1 with custom Qt 4.6.4
- Building ParaView 3.8.0 with custom Qt 4.6.3
- How to build Paraview 3.6.1 and Qt 4.3.5, including on how to use the cmake that comes with the package ThirdParty-1.6.linuxGcc.gtgz: New user needs help (note: this is now somewhat outdated
)
- On how to get and use the pre-built ParaView X.X.X from www.paraview.org to work with OpenFOAM:
- Need ParaView with everything on it? Try this: ParaView 3.12.0 SuperBuild on OpenFOAM
- OpenFOAM 2.1.0/x and building ParaView 3.12.0 on Ubuntu 10.04: paraview compilation error paraview-3.12.0 - post #9
- Tip about building ParaView 3.14 with OpenFOAM: http://www.cfd-online.com/Forums/ope...4-version.html
- Use the pre-built ParaView version provided with OpenFOAM's deb/rpm packages in any OpenFOAM installation: http://www.cfd-online.com/Forums/ope...tml#post345619
- Pre-built ParaView 3.98.0 on OpenFOAM 1.6-ext: http://www.cfd-online.com/Forums/ope...tml#post401643 post #35
- If you have problems building ParaView 4.1.0 with Open-MPI 1.7.2 or similar: http://www.cfd-online.com/Forums/par...tml#post480315 post #4
- Want to build ParaView without CUDA, but CUDA is standing in your way? Check this post: http://www.cfd-online.com/Forums/ope...tml#post495256 - post #6
- Initial discovery: http://www.cfd-online.com/Forums/ope...tml#post482894 - post #2
Problems with Visualization:
- Usual problems with ParaView and some hints on how to fix them: Segmentation fault when visualizing in ParaView
Also check this one: ParaView Subwindow Crash - If running ParaView inside a virtual machine and it crashes with "illegal instruction (core dumped)": http://www.cfd-online.com/Forums/par...re-dumped.html
- ParaFoam error could not find a decent visual - solution in post #4
- "Cannot create GLX context": http://www.cfd-online.com/Forums/ope...tml#post366876 post #8
- Ubuntu 12.10 + openfoam2.2.0 ==> paraview error message
- Using GroovyBC or swak4Foam and paraFoam/paraview crashes? http://www.cfd-online.com/Forums/ope...w-crashes.html
- If you are having problems with rescaling data (the colour labels) in ParaView, you might have tripped on a now known bug in ParaView 3.8.0. To get past this, read this post (and its thread): paraview 3.8 auto rescale doesn't work #6
- Unable to create a section cut to the the mesh, then use "Extract Cells by Region": http://www.cfd-online.com/Forums/ope...tml#post372605 post #6
- Accessing a ParaView server on a server/cluster, over an SSH tunnel, thus going under the firewall's nose: connection to external server
- Similar instructions: http://www.cfd-online.com/Forums/ope...tml#post530846 post #9
- http://www.cfd-online.com/Forums/ope...ver-0-0-a.html
- Testing pvbatch with off-screen rendering: http://www.cfd-online.com/Forums/par...tml#post374418 post #4
- Problems with black/dark triangles: http://www.cfd-online.com/Forums/ope...tml#post343327 post #5
- Problems with drivers for the graphics card:
- Intel cards and internal GPUs: http://www.cfd-online.com/Forums/ope...tml#post350079 post #5
- ATI/AMD GPU cards - start reading here: http://www.cfd-online.com/Forums/ope...tml#post367514 post #13
- Or here: http://www.cfd-online.com/Forums/ope...tml#post462544 post #27
- Having problems with ASCII STL files and with ParaView crashing when trying to open one? A few solutions have been found:
- Issues with VirtualBox rendering: http://www.cfd-online.com/Forums/ope...ddrawable.html
Total Comments 0
