Combustion with flamelet model

Dear all,

I am working in the topic of the steady state laminar flamelet model since 2012 and used this model in my master thesis for biomass combustion chambers. Therefor I used the built version from Alberto Cuoci et. al. which was generated for OpenFOAM-1.7.x. For my research I used a newer version of OpenFOAM due to the fact of released snappyHexMesh version. Bruno Santos rebuilt the flamelet model for OpenFOAM-1.7.x, 2.0.x, 2.1.x - see here: Bruno Santos Blog about libOpenSMOKE...