OpenFoam, SALOME, all free tools for engineers
Hey, Dude, be careful with liftDir/dragDir in controlDict
Posted February 19, 2013 at 05:41 by skeptik
When U is changed due to angle of attack you should change controlDict in libForces section.
So, what can you get when you have proper controlDict
U=56.4, Re=1.6e6
The mesh was refined so it was OK after checkMesh
not bad) the next - recalculate LowRe K-eps, just for fun.
So, what can you get when you have proper controlDict
U=56.4, Re=1.6e6
The mesh was refined so it was OK after checkMesh
not bad) the next - recalculate LowRe K-eps, just for fun.
Total Comments 0
