Rui

My Master Thesis

Posted April 17, 2009 at 09:47 by Rui
Updated September 1, 2010 at 19:30 by Rui

Tags ansys cfx, mould filling, numerical simulation, rim, two-phase flow

My Master Thesis "Numerical Simulation of the Filling and Curing Stages in Reaction Injection Moulding, using CFX" is available on the Donated Texts page http://www.cfd-online.com/Wiki/CFD-Wiki:donated_texts , or, in a better pdf quality (6.1MB), from http://sites.google.com/site/ruiigreja2/MyMasterThesis