kindle

Originally Posted by Alhasan

Hey All,

How to use mapping fields function in openFOAM,

-say there are two different case two boxes, one big box and one small box with inlet on one side and outlet on the other side and all the other sides are walls. the small box is within the big box and it is in the right place in space.

-how do i even go about

Originally Posted by gigilentini8

Dear FOAMers,
can you confirm me that the function object below in ControlDict is the correct and fastest way to calculate average over cutting planes in a 3D simulation during runtime?
it seems to work but I'm not 100% sure about the results...

Originally Posted by wyldckat

Greetings Pete,

I see that you've got 2 reports on this topic:

• The original one: http://www.openfoam.org/mantisbt/view.php?id=1789
• The more recent one: http://www.openfoam.org/mantisbt/view.php?id=1790

If I understand you correctly, you want to do a plain average of the fields over the existing time snapshots?

In addition, do you mean that the average results for a dynamic mesh are acceptable for doing

Originally Posted by kassiotis

Hello everybody

Context: I'm coupling a FEM code (Feap) and OpenFOAM to solve FSI problems by a partitionned strategy. I try to validate this coupling.
To be more precise, i'm using the solver icoDyMFoam of OpenFOAM 1.4.1. The mesh is solved with the following options :

// ---------- dynamicMeshDict ---------
dynamicFvMesh dynamicMotionSolverFvMesh;
motionSolverLibs ("libfvMotionSolvers.so");

Originally Posted by minger

I've been reading through tutorials and web pages for a couple weeks now and can't figure out how to get this working. It seems that all the tutorials with DoF (e.g. wingMotion [flutter]) are made for small displacements and use the laplacianDisplacement solvers.

Basically, I am looking to do something like:
http://www.youtube.com/watch?v=jZwUA_xnces

I have seen many many tutorials and examples where the domain motion is a