How to install salome 7.7.1
Posted December 21, 2015 at 09:36 by suggalachaitu
1- open a new terminal type [ tar xzf SALOME-7.7.1-OPENSOURCE-UB14.tgz ]
2- follow by [ ./Salome-V7_7_1-LGPL-x86_64.run ]
you will see this error
bash: ./Salome-V7_7_1-LGPL-x86_64.run: Permission denied
3- then type [ chmod +x ./Salome-V7_7_1-LGPL-x86_64.run ]
type this again [ ./Salome-V7_7_1-LGPL-x86_64.run ]
Then you are good to go.
=======================================
Self Extracting Salome V7_7.1 Installer
2- follow by [ ./Salome-V7_7_1-LGPL-x86_64.run ]
you will see this error
bash: ./Salome-V7_7_1-LGPL-x86_64.run: Permission denied
3- then type [ chmod +x ./Salome-V7_7_1-LGPL-x86_64.run ]
type this again [ ./Salome-V7_7_1-LGPL-x86_64.run ]
Then you are good to go.
=======================================
Self Extracting Salome V7_7.1 Installer
Total Comments 1
Comments
-
Thanks mate!!Posted December 2, 2017 at 21:06 by atulsingh
