|
[Sponsors] |
Detailed Chemical reaction over combustion model |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 22, 2017, 14:07 |
Detailed Chemical reaction over combustion model
|
#1 |
New Member
engine_sim
Join Date: Apr 2017
Posts: 10
Rep Power: 9 |
i am doing duel fuel (hydrogen-diesel) simulation. i have done training course in AVL Fire (2014.2) there i was informed that i cannot use any combustion model for simulation of pure duel-fuel (energy share less then 90% by gas) so i used detailed chemical gas phase reaction for simulation. now i have couple of questions
1) without activating combustion how can i get phi-t graphs. 2) i want to emphasize on why i have to use detailed gas phase reaction over combustion models in my project thesis so where can i get advantaged of gas phase reaction over combustion model (any combustion model available in avl fire). |
|
June 23, 2017, 14:13 |
|
#2 |
New Member
Venkatesh V
Join Date: Sep 2009
Posts: 24
Rep Power: 17 |
With GGPR model Equivalence Ratio is not defined in the solver. You could write formula to create a derived variable based on fuel and O2 species mass fractions.
If you are looking for Equivalence Ratio which is not consumed by combustion ( similar to mixture fraction) then you need use additional passive scalar and user function to calculate equivalence ratio. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PaSR + infinite reaction rate in reactingFoam --> no reactions occurring | tatu | OpenFOAM Running, Solving & CFD | 3 | June 2, 2024 11:04 |
How to switch off combustion and reaction in reactingFoam | shenzhou1987 | OpenFOAM Running, Solving & CFD | 16 | October 26, 2017 16:31 |
EDC combustion and reaction model error | Noobism | FLUENT | 0 | January 31, 2016 01:35 |
LES and combustion model | Margherita Cadorin | CFX | 0 | October 29, 2008 06:24 |
combustion model | Hennie van der Westhuizen | Siemens | 7 | February 27, 2002 03:10 |