Lost Scenario Results..??

Fugacity · February 16, 2012, 15:24

I have a design study made up of 7 scenarios. I've just had 2 occasions of this program forgetting the results of a couple of the scenarios:

Procedure:
-Start Design Study.
-Que up all 7 Scenarios to solve.
-Monitor the solutions.
-I see that 4 of my scenarios have solved, so I open the design study and I can see results for scenarios 1,2 & 4, but there is no Results icon for scenario 3.
However, If I choose to solve Scenario 3 it wants to start from iteration xxx, NOT Iteration 0; Which tells me that it solved the flow field but lost the link to the results file structure. (There is a results file structure in the scenario folder, so a result exists...)

Is there any way to rebuild this link w/o re-running the analysis??

ryan.arnaudin · February 24, 2012, 11:48

Since there is a restart point for your iteration xxx you may try running 0 or 1 iterations from there. This may allow the software to load the results from the last iteration. If something is corrupt in the mesh or results files though this probably wont work. Worth a try though since you don't have results as it is and no one has offered a better workaround.

February 16, 2012, 15:24	Lost Scenario Results..??	#1
Fugacity New Member Chris Join Date: Jan 2012 Location: St. Louis Posts: 13 Rep Power: 14	I have a design study made up of 7 scenarios. I've just had 2 occasions of this program forgetting the results of a couple of the scenarios: Procedure: -Start Design Study. -Que up all 7 Scenarios to solve. -Monitor the solutions. -I see that 4 of my scenarios have solved, so I open the design study and I can see results for scenarios 1,2 & 4, but there is no Results icon for scenario 3. However, If I choose to solve Scenario 3 it wants to start from iteration xxx, NOT Iteration 0; Which tells me that it solved the flow field but lost the link to the results file structure. (There is a results file structure in the scenario folder, so a result exists...) Is there any way to rebuild this link w/o re-running the analysis??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM - Validation of Results	Ahmed	OpenFOAM Running, Solving & CFD	10	May 13, 2018 19:28
wind tunnel results vs fluent	pixie	Main CFD Forum	1	August 20, 2009 09:02
Velocity spots in openFoam results	Valle	OpenFOAM Running, Solving & CFD	4	August 19, 2009 06:53
How to plot a function over a time period?	Cirion0000	CFX	4	July 18, 2009 13:48
Export CFD Solver results to text file format	Maik	Main CFD Forum	2	May 23, 2008 02:34

February 24, 2012, 11:48		#2
ryan.arnaudin New Member Ryan Join Date: Dec 2011 Posts: 10 Rep Power: 15	Since there is a restart point for your iteration xxx you may try running 0 or 1 iterations from there. This may allow the software to load the results from the last iteration. If something is corrupt in the mesh or results files though this probably wont work. Worth a try though since you don't have results as it is and no one has offered a better workaround.