Can't generate a mesh

Vertex · March 29, 2016, 10:03

Hello,
After the first installation of Autodesk Simulation CFD 2013 the program can't generate a mesh even on a simple geometry. The failure message says "the Solver has exited unexpectedly" (please see the attachhed pictures). Has anybody experienced the same problem?
Thank you for the help in advance.

LAC_ME · March 29, 2016, 17:42

There are many things that could cause that:
improper Material conditions
Poor boundary conditions
Poor Mesh sizing
License issues......

Vertex · March 31, 2016, 10:09

Thanks for the help!

I have also found the detail description of the possible failure reasons.

https://knowledge.autodesk.com/searc...xpectedly.html

March 31, 2016, 10:09		#3
Vertex New Member Alex Join Date: Mar 2016 Posts: 3 Rep Power: 10	Thanks for the help! I have also found the detail description of the possible failure reasons. https://knowledge.autodesk.com/searc...xpectedly.html Last edited by Vertex; April 1, 2016 at 03:36.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
[ICEM] How to generate this kind of mesh?	mingersai	ANSYS Meshing & Geometry	51	February 16, 2017 08:32
How to generate a Cartesian 2D Mesh using MATLAB?	sujithsubramanian	Main CFD Forum	0	March 9, 2014 16:46
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 05:24
[snappyHexMesh] SnappyHexMesh not generate mesh first time	mavimo	OpenFOAM Meshing & Mesh Conversion	4	August 26, 2008 08:08

March 29, 2016, 17:42		#2
LAC_ME New Member Join Date: Mar 2016 Posts: 1 Rep Power: 0	There are many things that could cause that: improper Material conditions Poor boundary conditions Poor Mesh sizing License issues......