ANSYS help required with commands or macro urgently

destruction · February 17, 2011, 11:26

Hey all
i'm an intern and I have to put some 260 hard points into ANSYS and I just don't have the time to do it individually as I dont have the time.

can anyone tell me HOW TO:-

INPUT HARD POINTS INTO FROM AN INPUT FILE (.xls excel sheet) ON ANSYS

OR

SOME KIND OF COMMAND FOR CREATING HARD POINTS FAST N EASY

OR

HELP ME (JUST GUIDE ME WITH THE RIGHT INFO) ON HOW TO WRITE A MACRO TO DO JUST THAT

PLZZZZ HELP NEEDED BADLY will get screwed proper hard if I mess this up ..... so plzz guys some help

PSYMN · February 17, 2011, 12:51

ANSYS can be a vague word? It is really the name of the company and doesn't clarify which product you are using.

I am not an ANSYS Mechanical APDL (AKA "ANSYS Classic" or "BlackWindow ANSYS") expert, so for that question I suggest contacting TECH support or cracking open a dusty manual...

But if you mean in Workbench... more Specifically in DesignModeler...

Go to File => Create => Point...

In the details panel (bottom left), change the type to "construction point" and the "Definition" to "From Coordinates File".

You can look up the exact file format in the help, I think it was just X Y Z.

February 17, 2011, 11:26	ANSYS help required with commands or macro urgently	#1
destruction New Member Anika bloom Join Date: Feb 2011 Posts: 1 Rep Power: 0	Hey all i'm an intern and I have to put some 260 hard points into ANSYS and I just don't have the time to do it individually as I dont have the time. can anyone tell me HOW TO:- INPUT HARD POINTS INTO FROM AN INPUT FILE (.xls excel sheet) ON ANSYS OR SOME KIND OF COMMAND FOR CREATING HARD POINTS FAST N EASY OR HELP ME (JUST GUIDE ME WITH THE RIGHT INFO) ON HOW TO WRITE A MACRO TO DO JUST THAT PLZZZZ HELP NEEDED BADLY will get screwed proper hard if I mess this up ..... so plzz guys some help

February 17, 2011, 12:51	Create Point from Coordinates File in DM	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	ANSYS can be a vague word? It is really the name of the company and doesn't clarify which product you are using. I am not an ANSYS Mechanical APDL (AKA "ANSYS Classic" or "BlackWindow ANSYS") expert, so for that question I suggest contacting TECH support or cracking open a dusty manual... But if you mean in Workbench... more Specifically in DesignModeler... Go to File => Create => Point... In the details panel (bottom left), change the type to "construction point" and the "Definition" to "From Coordinates File". You can look up the exact file format in the help, I think it was just X Y Z.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Macro command combatibility ANSYS workbench	Tassos	CFX	6	January 13, 2014 05:19
Version 15 on Mac OS X	gschaider	OpenFOAM Installation	113	December 2, 2009 11:23
OpenFOAM14 for Mac OSX Darwin 104	gschaider	OpenFOAM Installation	118	July 20, 2008 06:19
prob with FSI in ansys. Help required urgently	sumeet	Main CFD Forum	1	January 5, 2006 05:06
Ansys Macro for Cd and Cl required	Iain Johnstone	Main CFD Forum	0	February 22, 1999 18:17