ANSYS 12 installation not working on multi-core Processors

JOKER · October 11, 2010, 04:14

Hy, Everyone!

I was using ANSYS12 (32 bit) on dual-core processor (x86) with XP operating system. It worked best for me..!

But When I tried same installation on core i7-860 with same OS, setup did not work and end-up without any specific error.

Same thing happen for quad-core processor

Anybody help me..plz

elbasharat · October 22, 2010, 16:57

can you please tell me your exact error you are getting while loading in multi core processors ?

JOKER · November 30, 2010, 10:53

Hy Everyone..!

I identified problem wrongly..In fact it is because of Prerequisites as new versions of .NET and C++ redistributable are already available..
It works perfect on my LAPTOP whatever the situation..

Please Help me out...

Butscher · December 7, 2010, 05:12

i also have this error. i have also many other errors. dont know where and how to start.

sac · December 7, 2010, 05:56

How about posting the errors?

What you've just posted is pretty unhelpful if you want people to help you.

As a collective group we don't have ESP so if there is a problem you need to spell it out.

October 11, 2010, 04:14	ANSYS 12 installation not working on multi-core Processors	#1
JOKER Member Join Date: Aug 2010 Posts: 36 Rep Power: 16	Hy, Everyone! I was using ANSYS12 (32 bit) on dual-core processor (x86) with XP operating system. It worked best for me..! But When I tried same installation on core i7-860 with same OS, setup did not work and end-up without any specific error. Same thing happen for quad-core processor Anybody help me..plz

October 22, 2010, 16:57	parallel	#2
elbasharat Member Basharat Join Date: Feb 2010 Posts: 37 Rep Power: 16	can you please tell me your exact error you are getting while loading in multi core processors ? __________________ Rgds Martin

December 7, 2010, 05:12		#4
Butscher New Member Join Date: Aug 2010 Posts: 4 Rep Power: 16	i also have this error. i have also many other errors. dont know where and how to start. __________________ Mechanical Man

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Superlinear speedup in OpenFOAM 13	msrinath80	OpenFOAM Running, Solving & CFD	18	March 3, 2015 06:36
cfx12 x64 meshing: pc has 4 core but only 1 core working for the mesh? why?	leeruoyun	CFX	2	March 23, 2010 13:37
Ansys installation	az_f	ANSYS Meshing & Geometry	3	March 15, 2010 10:16
OpenFOAM installation problem on Linux 32bit	kumar	OpenFOAM Installation	0	April 27, 2007 06:41
Windows Installation Petrbs Port Redux Patches and Binary Distribution	brooksmoses	OpenFOAM Installation	0	February 10, 2006 18:35

November 30, 2010, 10:53		#3
JOKER Member Join Date: Aug 2010 Posts: 36 Rep Power: 16	Hy Everyone..! I identified problem wrongly..In fact it is because of Prerequisites as new versions of .NET and C++ redistributable are already available.. It works perfect on my LAPTOP whatever the situation.. Please Help me out...

December 7, 2010, 05:56		#5
sac Member Join Date: Jun 2010 Posts: 44 Rep Power: 17	How about posting the errors? What you've just posted is pretty unhelpful if you want people to help you. As a collective group we don't have ESP so if there is a problem you need to spell it out.