Home > Forums > Software User Forums > ANSYS

SOx model in coal combustion simulation post processing

Updated Threads

Reply

Search this Thread

December 14, 2023, 01:25	SOx model in coal combustion simulation post processing	#1
tsuman New Member tsuman Join Date: Dec 2023 Posts: 3 Rep Power: 3	Hello!I am working on the coal combustion simulation, and when the calculation is convergence, I turn off the DPM ,turn on the SOx model , and only select the pollution so2 and h2s equation, but the mass fraction of the calculated so2 appears 1,is there anything wrong with my operation? Last edited by tsuman; December 16, 2023 at 23:30.

Reply

Tags

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post Processing of LES simulation	likhitha	Visualization & Post-Processing	1	August 17, 2020 12:19
Problem on EDC model for coal combustion	lei	FLUENT	4	September 3, 2015 10:39
Nonpremixed Combustion Model for Coal Gasification	C.Y.Ler	FLUENT	2	April 29, 2014 09:51
Can two oxidants be used in coal combustion model?	evane	CFX	1	August 24, 2006 21:54
P1 model discretization during coal combustion	weihongqiang	FLUENT	0	October 6, 2005 08:58

All times are GMT -4. The time now is 12:15.