Flow courant number

user9 · March 13, 2020, 13:39

What is flow courant number in the solution in Ansys fluent . I have read the ansys user guide but didn't understand the concept. They say it is used in density based solver but even while using pressure based solver in the solution method it shows " flow courant number" and by default its value is 200.

SardarMech · January 19, 2022, 09:04

I can't say for sure this will answer your question, but chances are some confusion can be settled whatsoever- for you or for those having come across this thread; Take a look at the link below:

wrong solution at LOW CFL number

March 13, 2020, 13:39	Flow courant number	#1
user9 New Member anuj Join Date: Feb 2020 Posts: 17 Rep Power: 6	What is flow courant number in the solution in Ansys fluent . I have read the ansys user guide but didn't understand the concept. They say it is used in density based solver but even while using pressure based solver in the solution method it shows " flow courant number" and by default its value is 200.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
SigFpe when running ANY application in parallel	Pj.	OpenFOAM Running, Solving & CFD	3	April 23, 2015 15:53
foam-extend_3.1 decompose and pyfoam warning	shipman	OpenFOAM	3	July 24, 2014 09:14
AMI interDyMFoam for mixer	danny123	OpenFOAM Running, Solving & CFD	4	June 19, 2013 05:49
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15

January 19, 2022, 09:04		#2
SardarMech New Member Sardar Join Date: Dec 2021 Posts: 5 Rep Power: 4	I can't say for sure this will answer your question, but chances are some confusion can be settled whatsoever- for you or for those having come across this thread; Take a look at the link below: wrong solution at LOW CFL number