|
[Sponsors] |
Fluent CFD-Post Issue w/ Results Tab in Project Manager |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
John G
Join Date: Nov 2019
Posts: 1
Rep Power: 0 ![]() |
Hi, so I'm running into issue after all the mesh, setup, and solutions are evaluated. For some reason CFD-Post refuses to open and display the results of the analysis on the model in question. However; when it does open results the part does not load and the solutions are not displayed
I keep getting the error below, when I try to open Results: CFD-Post Application Error ERROR 'wbload' action requires parameter: 'id'. Pics: https://ibb.co/LxrQ7dH https://ibb.co/jZFDspx For some odd reason; this error only appears when working in a project and it is non-existent in a wbpz (archive). Any idea why? Please help me get past this error. Thank You. Last edited by greekkid18; November 25, 2019 at 20:14. |
|
![]() |
![]() |
![]() |
Tags |
ansys, cfd, cfd-post, fluent, mesh 3d |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
looking for a smart interface matlab fluent | chary | FLUENT | 24 | June 18, 2021 09:07 |
Plotting transient results in cfd post or fluent | suyesh | Visualization & Post-Processing | 1 | May 13, 2016 09:54 |
The fluent stopped and errors with "Emergency: received SIGHUP signal" | yuyuxuan | FLUENT | 0 | December 3, 2013 22:56 |
few quesions on ANSYS ICEMCFD and FLUENT | Prakash.Paudel | ANSYS | 0 | August 12, 2010 12:07 |
Who's ok for an Open Source CFD project ? | Viet | Main CFD Forum | 16 | July 26, 1999 15:57 |