Problem with Gurney flap -- CFD Online Discussion Forums

January 16, 2019, 10:43	Problem with Gurney flap	#1
Oktim New Member Dimitar Join Date: Nov 2018 Posts: 1 Rep Power: 0	Hello, Im trying to make gurney flap on the trailing edge on a NACA0012 airfoil but with no success. Is there a way to draw it or crate it in ANSYS DesignModeler (i've tried to draw it but again with no success because the airfoil was open) Also, I saw a thread and someone shared a .dat file but the file is missing some data. I would really aooreaciate if someone could help me with this I need it for a project. This is what I made Last edited by Oktim; January 16, 2019 at 12:10.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
area does not match neighbour by ... % -- possible face ordering problem	St.Pacholak	OpenFOAM	11	September 4, 2024 05:28
Is COMSOL Multi Physics is suitable to solve complex flow problem?	steve lee	COMSOL	8	January 5, 2023 03:31
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 20:13
Problem with rotational mesh deformation: Part II	NymphadoraTonks	CFX	2	November 4, 2004 04:05
Problem with rotational mesh deformation	NymphadoraTonks	CFX	1	October 17, 2004 19:43

All times are GMT -4. The time now is 01:33.